Difference between revisions of "User:Jef"

From Ross-Tech Wiki
Line 53: Line 53:
 
Channel 05<br>
 
Channel 05<br>
 
'''[Read]'''<br>
 
'''[Read]'''<br>
new value 1<br>
+
New value 1<br>
 
'''[Test]'''<br>
 
'''[Test]'''<br>
 
'''[Save]'''<br>
 
'''[Save]'''<br>

Revision as of 17:14, 23 March 2018

Prerequisites:

  • Doors, hood and rear lid closed
  • Engine at idle, parking brake set
  • Parked on level surface
  • Metric tape measure

Measuring the ride height is done from the center of the wheel, vertically, to the edge of the fender to the closest millimeter.
Rim level control.jpg


[Select]
[34 - Level Control]
[Security Access - 16]
Enter 31564
[Do It!]

  • If the Security Access code does not work, try 31564 in [Login - 11] or [Coding II - 11]

[Adaption - 10]

Channel 01 (front left)
[Read]

  • A message of "Wait" will be displayed while the right height is adjusted.
  • When message changes to "Value", take the measurement at front left.
  • Input the New value in millimeters.

[Test]
[Save]
[Yes]

Channel 02 (front right)
[Read]

  • Take measurement at right front.
  • Input the New value in millimeters.

[Test]
[Save]
[Yes]

Channel 03 (rear left)
[Read]

  • Take measurement at left rear.
  • Input the New value in millimeters.

[Test]
[Save]
[Yes]

Channel 04 (rear right)
[Read]

  • Take measurement at right rear.
  • Input the New value in millimeters.

[Test]
[Save]
[Yes]

Channel 05
[Read]
New value 1
[Test]
[Save]
[Yes]
[Done, Go Back]


Special Notes

  • These instructions should work with most non-USD Level Control systems found in:
    • A6
    • A8
    • Q7
    • Phaeton
    • Touareg
    • Bentley Continental.

Video Link

Suspension Leveling Calibration

Thumbnail.jpg

http://www.youtube.com/watch?v=o2aeQ6bhu-Y