Difference between revisions of "User:Peter"
From Ross-Tech Wiki
| Line 10: | Line 10: | ||
* Battery Voltage = 12.0 - 14.0 V'''<br> | * Battery Voltage = 12.0 - 14.0 V'''<br> | ||
* No fault codes other than [[01087 | 01087 - Basic Setting Not Performed]]'''<br> | * No fault codes other than [[01087 | 01087 - Basic Setting Not Performed]]'''<br> | ||
| − | |||
* Perform G85-Steering Angle Sensor Basic Settings found on this Ross-Tech wiki page: | * Perform G85-Steering Angle Sensor Basic Settings found on this Ross-Tech wiki page: | ||
Revision as of 10:14, 3 June 2013
Basic Settings of the Active/Dynamic Steering
1B-Active Steering
Prerequisites:
- Battery Voltage = 12.0 - 14.0 V
- No fault codes other than 01087 - Basic Setting Not Performed
- Perform G85-Steering Angle Sensor Basic Settings found on this Ross-Tech wiki page:
http://wiki.ross-tech.com/wiki/index.php/Audi_A5_%288T%29_Steering_Wheel_Electronics#Basic_Setting
- Continue Only after successfully completing the G85 basic settings -
[Select]
[1B-Active Steering]
[Security Access - 16]
Enter 61378, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 101
[Go!]
[ON/OFF/Next]
- The results should be stored after a key cycle and fault code(s) should clear.
[Done, Go Back]
[Fault Codes - 02]
Check and clear fault codes.
[Close Controller, Go Back - 06]