Difference between revisions of "User:Peter"

From Ross-Tech Wiki
 
(16 intermediate revisions by 3 users not shown)
Line 1: Line 1:
=== Electronic Damping Control J250 - Basic Settings ===
 
  
  
'''Prerequisites:'''<br>
+
==  Audi A5 (8T) Active/Dynamic Steering ==
- Battery Voltage = 12.0 - 14.0'''<br>
+
 
- No fault codes other than [01087-Basic Setting Not Performed]'''<br>
+
Indentation as used on talk pages:
- Vehicle is lifted off the ground, on a suitable vehicle lift'''<br>
+
:Each colon at the start of a line
 +
::causes the line to be indented by three more character positions.
 +
:::(The indentation persists
 +
so long as no carriage return or line break is used.)
 +
:::Repeat the indentation at any line break.
 +
::::Use an extra colon for each response.
 +
:::::And so forth ...
 +
::::::And so on ...
 +
 
 +
 
 +
 
 +
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Centered text</div>
 +
 
 +
 
 +
function <code>int m2()</code> is nice.
 +
 
 +
 
 +
You can <del>strike out deleted material</del> and <ins>underline new material</ins>.
 +
 
 +
 
 +
Total number of articles on {{SITENAME}}: {{NUMBEROFARTICLES}}
 +
As of: {{CURRENTDAY}} {{CURRENTMONTHNAME}} {{CURRENTYEAR}} : {{CURRENTTIME}}
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
{| class="wikitable" style="border: none; background: none;"
 +
! colspan="2" rowspan="2" style="border: none; background: none;"|[[File:Pfeil_SO.svg|none|link=|20px]]
 +
! colspan="3"| To
 +
|-
 +
! Solid !! Liquid !! Gas
 +
|-
 +
! rowspan="3"| From
 +
! Solid
 +
| Solid-solid transformation || Melting || Sublimation
 +
|-
 +
! Liquid
 +
| Freezing || {{sdash}} || Boiling/evaporation
 +
|-
 +
! Gas
 +
| Deposition || Condensation || {{sdash}}
 +
|}
 +
{| class="wikitable" style="border: none; background: none;"
 +
! scope="col" | Year
 +
! scope="col" | Size
 +
| rowspan="5" style="border: none; background: none;"|
 +
! scope="col" | Year
 +
! scope="col" | Size
 +
| rowspan="5" style="border: none; background: none;"|
 +
! scope="col" | Year
 +
! scope="col" | Size
 +
|-
 +
| 1990 || 1000<br />(est) || 2000 || 1357 || 2010 || 1776
 +
|-
 +
| 1991 || 1010 || 2001 || 1471 || 2011 || 1888
 +
|-
 +
| colspan="2" style="text-align: center;"|⋮
 +
| colspan="2" style="text-align: center;"|⋮
 +
| colspan="2" style="text-align: center;"|⋮
 +
|-
 +
| 1999 || 1234 || 2009 || 1616 || 2019 || 1997<br />(est)
 +
|}
 +
 
 +
== Coding ==
 +
 
 +
'''Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it's Coding to the new Module.
 +
 
 +
 
 +
 
 +
== Basic Setting ==
 +
 
 +
=== 1B-Active Steering ===
 +
 
 +
 
 +
'''<u>Prerequisites:</u>'''<br>
 +
* Battery Voltage = 12.0 - 14.0 V'''<br>
 +
* No fault codes other than [[01087 | 01087 - Basic Setting Not Performed]]'''<br>
 +
 
 +
* Perform G85-Steering Angle Sensor Basic Settings found on this Ross-Tech wiki page: [[Audi A5 (8T) Steering Wheel Electronics#Basic Setting|Audi A4/A5 (8K/8T) Steering Angle Sensor (G85) Calibration]]
 +
 
 +
 
 +
 +
 
 +
 
 +
<span style="color:#000000; background:#FFFF00"> '''- Continue Only after successfully completing the G85 basic settings -''' </span>  
 +
 
 +
*Leave the steering wheel in the straight ahead position during the next steps.
  
  
 
'''[Select]'''<br>
 
'''[Select]'''<br>
'''[14 - Susp. Elect]'''<br>
+
'''[1B-Active Steering]'''<br>
'''[Meas. Blocks - 08]'''<br>
+
 
Note: The values stored in the Measuring Value Blocks below are the Minimum and Maximum sensor values.'''<br>
 
Group-054 Field-1 = G78 - Min value'''<br>
 
Group-054 Field-2 = G78 - Max value'''<br>
 
<br>
 
Group-055 Field-1 = G289 - Min value'''<br>
 
Group-055 Field-2 = G289 - Max value'''<br>
 
<br>
 
'''Look at:'''<br>
 
'''Group-003 - Field-1,2,3 -  Actual Sensor values'<br>
 
- If the values are with in the range of the Min - Max stored values from MVBs 054 and 055 then'''<br>
 
Basic settings can be performed, if not inspect suspension or sensors.'''<br>
 
<br>
 
 
'''[Security Access - 16]'''<br>
 
'''[Security Access - 16]'''<br>
Enter 31564, to enable the basic setting.'''<br>
+
Enter 61378, to enable the basic setting.'''<br>
 
'''[Do it!]'''<br>
 
'''[Do it!]'''<br>
 +
 +
 
'''[Basic Settings - 04]'''<br>
 
'''[Basic Settings - 04]'''<br>
'''Group 001'''<br>
+
Group 101<br>
 
'''[Go!]'''<br>
 
'''[Go!]'''<br>
 +
'''[ON/OFF/Next]''' <br>
 +
 +
* The results should be stored after a key cycle and fault code(s) should clear.
 +
 +
 +
'''[Done, Go Back]''' <br>
 +
'''[Fault Codes - 02]'''<br>
 +
Check and clear fault codes.<br>
 +
'''[Close Controller, Go Back - 06]'''<br>
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
======================================================================
 +
 +
 +
 +
001 Upper Limit Exceeded<br>
 +
002 Lower Specified Value too Low<br>
 +
003 Mechanical/Hydraulic Fault<br>
 +
004 No signal/communication<br>
 +
005 No or Incorrect Basic Settings/Adaptation<br>
 +
006 Short Circuit to positive<br>
 +
007 Short to Ground<br>
 +
008 Implausible Signal/Ranger or Performance<br>
 +
009 Open Circuit/short to ground<br>
 +
010 Open Circuit/short to positive<br>
 +
011 Open Circuit<br>
 +
012 Electrical fault in Circuit<br>
 +
013 Check/Read DTC memory<br>
 +
014 Defective<br>
 +
015<br>
 +
016 Signal outside of Tolerance<br>
 +
 
<br>
 
<br>
The New values should be displayed.'''<br>
+
 
- To check the learned values, check Measuring Value Group-008.'''<br>
+
027 Implausible Signal<br>
[Meas. Blocks - 08]'''<br>
+
028 Short Circuit to positive<br>
Enter [008] - Go!'''<br>
+
029 Short to Ground<br>
The values displayed should be the learned values as displayed in the Basic Settings window.'''<br>
+
030 Open Circuit<br>
 +
031 Open Circuit/short to ground<br>
 +
035 No Indication in Display<br>
 +
036 Open Circuit<br>
 +
037 Faulty<br>
 +
045 Connector<br>
 +
049 No Communications<br>
 +
079 Checking DTC Memory<br>
 +
194 Comparison not Carried Out<br>
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
__FORCETOC__
 +
== 18613/P2181/008577 - Performance Malfunction in Cooling System ==
 +
 
 +
==== Possible Causes ====
 +
 
 +
* Faulty Coolant Sensor
 +
* Faulty Coolant Thermostat
 +
* Faulty Wiring, Connections
 +
 
 +
''Note'': This fault code sets when engine coolant temperature mapping is lower and out of expected range based on operating conditions of the engine.
 +
* For example: Engine warms up, thermostat opens and stays open, coolant temperature drops below normal operating range. The ECM knows the coolant temperature should stay within 80.0...110.0 °C typically after warm up. Thus a drop in coolant temperature below normal operating temperature is not possible without a malfunction in cooling system.
 +
 
 +
==== Possible Solutions ====
 +
 
 +
* Check G62 - Engine Coolant Temperature Sender <br>
 +
** Inspect wiring for G62 (Coolant Migration, damage, corrosion, etc)
 +
 
 +
* Check (if applicable) G83 - Radiator Outlet, Coolant Temperature Sender <br>
 +
** Inspect wiring for G83 (Coolant Migration, damage, corrosion, etc)
 +
 
 +
* Check Coolant Thermostat
 +
**  Use Graph function in VCDS, Measuring Value Blocks - MVB
 +
** Start Engine cold, graph Coolant Temperature Sender (G62) Typically MVB Group-001
 +
** Hold RPM around 1,500rpm and watch coolant temp increase in Graph until thermostat opens, indicated by a slight drop in coolant temp
 +
** If coolant temp drops below minimum operating temperature (80°C) or never reaches operating temperature, (verified by external thermometer) suspect failed thermostat
 +
 
 +
* Vehicles with both G62-Engine Outlet, Coolant Temperature Sensor and G83-Radiator Outlet, Coolant Temperature Sensor
 +
** Use Measuring Value Block group MVB-130 instead on MVB-001
 +
** G62 should increase in Temperature before G83 increase when engine coolant is cold
 +
** G83 will increase when the thermostat opens and after G62 reaches operating temperature (80°C)
 +
** If G62 and G83 both increase while engine warms up, suspect failed thermostat
 +
 
 +
 
 +
==== Special Notes ====
 +
 
 +
* Check the stored Freeze Frame data with this fault code.  Freeze Frame information will be found in the fault code description (if the module supports it) or in Generic OBD-II if the vehicle complies with those regulations.
 +
** Freeze Frame data stored at -40*C is generally an indication of a faulty ECT or wiring.
 +
** Freeze Frame data stored at +140*C is generally an indication of a faulty ECT or wiring.
 +
** Freeze Frame data stored with in the 68*C ~ 80*C range is an indication that the vehicle was close to, but not within, the cooling systems normal operation range. The Thermostat itself or Cooling system components may be at fault.
 +
 
 +
 
 +
-----------------------------------------------------------------------------------------------------------------------------
 +
 
 +
 
 +
 
 +
==Clean Diesel Readiness Status (non UDS Controllers)  ==
 +
 
 +
====This information can be found in the [01-Engine] Measuring Value Blocks in the form of binary data.====
 +
====Below is a guide so it is possible to read and understand the binary data in the fields.====
 +
 
 +
* Measuring Value Block Group [089]
 +
** Field 1 - 0000 0000  -  Fault codes stored and Check Engine Light Status
 +
** x??? ???? - Fault code count in binary
 +
** ?xxx xxxx - Check Engine Light On = [1], Off = [0]
 +
 
 +
Field 2 = 0000 0000
 +
?xxx xxxx - N/A
 +
x?xx xxxx - Comprehensive component monitor readiness status, Incomplete =  [1], Complete = [0]
 +
xx?x xxxx - Fuel system monitor readiness status, Incomplete =  [1], Complete = [0]
 +
xxx? xxxx - Misfire monitor readiness status, Incomplete =  [1], Complete = [0]
 +
xxxx ?xxx - Ignition monitors - Spark or Compression , Supported Function = [1]
 +
xxxx x?xx - Comprehensive component monitors, Supported Function = [1]
 +
xxxx xx?x - Fuel system monitor, continuous, Supported Function = [1], Not Supported = [0]
 +
xxxx xxx? - Misfire monitor, continuous, Supported Function = [1], Not Supported = [0]
 +
 
 +
Field 3 = 0000 0000  - Monitors that are supported
 +
?xxx xxxx - EGR/VVT System Monitor, Supported Function = [1], Not Supported = [0]
 +
x?xx xxxx - DPF (Diesel Particle Filter) Monitor, Supported Function = [1], Not Supported = [0]
 +
xx?x xxxx -  Exhaust Gas Sensor Monitor, Supported Function = [1], Not Supported = [0]
 +
xxx? xxxx -  Not used on diesel vehicles at this time
 +
xxxx ?xxx -  Indicates Boost Pressure System Monitor, Supported Function = [1], Not Supported = [0]
 +
xxxx x?xx -  Not used on diesel vehicles at this time
 +
xxxx xx?x -  NOx/SCR After-treatment Monitor, Supported Function = [1], Not Supported = [0]
 +
xxxx xxx? -  NMHC Catalyst Monitor, Supported Function = [1], Not Supported = [0]
 +
 
 +
 
 +
Field 4 = 0000 0000    - Readiness status of the supported systems
 +
?xxx xxxx - EGR/VVT System monitor readiness status, Incomplete =  [1], Complete = [0]
 +
x?xx xxxx -  DPF readiness status, Incomplete =  [1], Complete = [0]
 +
xx?x xxxx -  Exhaust Gas Sensor monitor readiness status, Incomplete =  [1], Complete = [0]
 +
xxx? xxxx -  Not used on diesel vehicles at this time
 +
xxxx ?xxx -  Boost pressure system monitor readiness Status, Incomplete =  [1], Complete = [0]
 +
xxxx x?xx -  Not used on diesel vehicles at this time
 +
xxxx xx?x -  Readiness status of NOx/SCR After-treatment Monitor, Incomplete =  [1], Complete = [0]
 +
xxxx xxx? -  Readiness status of NMHC Catalyst Monitor, Incomplete =  [1], Complete = [0]
 +
 
 +
 
 +
- Abbreviations -
 +
DPF = Diesel Particle Filter
 +
NOx = Oxides of nitrogen
 +
SCR = Selective catalytic reduction systems
 +
NMHC = Non-methane hydrocarbons
 +
EGR = Exhaust Gas Recirculation
 +
VVT = Variable valve timing
 +
 
 +
 
 +
- Ignition Type -
 +
Spark = Gasoline
 +
Compression = Diesel

Latest revision as of 12:46, 16 January 2020


Audi A5 (8T) Active/Dynamic Steering

Indentation as used on talk pages:

Each colon at the start of a line
causes the line to be indented by three more character positions.
(The indentation persists

so long as no carriage return or line break is used.)

Repeat the indentation at any line break.
Use an extra colon for each response.
And so forth ...
And so on ...


Centered text


function int m2() is nice.


You can strike out deleted material and underline new material.


Total number of articles on Ross-Tech Wiki: 1,359 As of: 28 March 2024 : 10:24




To
Solid Liquid Gas
From Solid Solid-solid transformation Melting Sublimation
Liquid Freezing Template:Sdash Boiling/evaporation
Gas Deposition Condensation Template:Sdash
Year Size Year Size Year Size
1990 1000
(est)
2000 1357 2010 1776
1991 1010 2001 1471 2011 1888
1999 1234 2009 1616 2019 1997
(est)

Coding

Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it's Coding to the new Module.


Basic Setting

1B-Active Steering

Prerequisites:



- Continue Only after successfully completing the G85 basic settings -

  • Leave the steering wheel in the straight ahead position during the next steps.


[Select]
[1B-Active Steering]

[Security Access - 16]
Enter 61378, to enable the basic setting.
[Do it!]


[Basic Settings - 04]
Group 101
[Go!]
[ON/OFF/Next]

  • The results should be stored after a key cycle and fault code(s) should clear.


[Done, Go Back]
[Fault Codes - 02]
Check and clear fault codes.
[Close Controller, Go Back - 06]





==========================================================

001 Upper Limit Exceeded
002 Lower Specified Value too Low
003 Mechanical/Hydraulic Fault
004 No signal/communication
005 No or Incorrect Basic Settings/Adaptation
006 Short Circuit to positive
007 Short to Ground
008 Implausible Signal/Ranger or Performance
009 Open Circuit/short to ground
010 Open Circuit/short to positive
011 Open Circuit
012 Electrical fault in Circuit
013 Check/Read DTC memory
014 Defective
015
016 Signal outside of Tolerance


027 Implausible Signal
028 Short Circuit to positive
029 Short to Ground
030 Open Circuit
031 Open Circuit/short to ground
035 No Indication in Display
036 Open Circuit
037 Faulty
045 Connector
049 No Communications
079 Checking DTC Memory
194 Comparison not Carried Out








18613/P2181/008577 - Performance Malfunction in Cooling System

Possible Causes

  • Faulty Coolant Sensor
  • Faulty Coolant Thermostat
  • Faulty Wiring, Connections

Note: This fault code sets when engine coolant temperature mapping is lower and out of expected range based on operating conditions of the engine.

  • For example: Engine warms up, thermostat opens and stays open, coolant temperature drops below normal operating range. The ECM knows the coolant temperature should stay within 80.0...110.0 °C typically after warm up. Thus a drop in coolant temperature below normal operating temperature is not possible without a malfunction in cooling system.

Possible Solutions

  • Check G62 - Engine Coolant Temperature Sender
    • Inspect wiring for G62 (Coolant Migration, damage, corrosion, etc)
  • Check (if applicable) G83 - Radiator Outlet, Coolant Temperature Sender
    • Inspect wiring for G83 (Coolant Migration, damage, corrosion, etc)
  • Check Coolant Thermostat
    • Use Graph function in VCDS, Measuring Value Blocks - MVB
    • Start Engine cold, graph Coolant Temperature Sender (G62) Typically MVB Group-001
    • Hold RPM around 1,500rpm and watch coolant temp increase in Graph until thermostat opens, indicated by a slight drop in coolant temp
    • If coolant temp drops below minimum operating temperature (80°C) or never reaches operating temperature, (verified by external thermometer) suspect failed thermostat
  • Vehicles with both G62-Engine Outlet, Coolant Temperature Sensor and G83-Radiator Outlet, Coolant Temperature Sensor
    • Use Measuring Value Block group MVB-130 instead on MVB-001
    • G62 should increase in Temperature before G83 increase when engine coolant is cold
    • G83 will increase when the thermostat opens and after G62 reaches operating temperature (80°C)
    • If G62 and G83 both increase while engine warms up, suspect failed thermostat


Special Notes

  • Check the stored Freeze Frame data with this fault code. Freeze Frame information will be found in the fault code description (if the module supports it) or in Generic OBD-II if the vehicle complies with those regulations.
    • Freeze Frame data stored at -40*C is generally an indication of a faulty ECT or wiring.
    • Freeze Frame data stored at +140*C is generally an indication of a faulty ECT or wiring.
    • Freeze Frame data stored with in the 68*C ~ 80*C range is an indication that the vehicle was close to, but not within, the cooling systems normal operation range. The Thermostat itself or Cooling system components may be at fault.




Clean Diesel Readiness Status (non UDS Controllers)

This information can be found in the [01-Engine] Measuring Value Blocks in the form of binary data.

Below is a guide so it is possible to read and understand the binary data in the fields.

  • Measuring Value Block Group [089]
    • Field 1 - 0000 0000 - Fault codes stored and Check Engine Light Status
    • x??? ???? - Fault code count in binary
    • ?xxx xxxx - Check Engine Light On = [1], Off = [0]

Field 2 = 0000 0000 ?xxx xxxx - N/A x?xx xxxx - Comprehensive component monitor readiness status, Incomplete = [1], Complete = [0] xx?x xxxx - Fuel system monitor readiness status, Incomplete = [1], Complete = [0] xxx? xxxx - Misfire monitor readiness status, Incomplete = [1], Complete = [0] xxxx ?xxx - Ignition monitors - Spark or Compression , Supported Function = [1] xxxx x?xx - Comprehensive component monitors, Supported Function = [1] xxxx xx?x - Fuel system monitor, continuous, Supported Function = [1], Not Supported = [0] xxxx xxx? - Misfire monitor, continuous, Supported Function = [1], Not Supported = [0]

Field 3 = 0000 0000 - Monitors that are supported ?xxx xxxx - EGR/VVT System Monitor, Supported Function = [1], Not Supported = [0] x?xx xxxx - DPF (Diesel Particle Filter) Monitor, Supported Function = [1], Not Supported = [0] xx?x xxxx - Exhaust Gas Sensor Monitor, Supported Function = [1], Not Supported = [0] xxx? xxxx - Not used on diesel vehicles at this time xxxx ?xxx - Indicates Boost Pressure System Monitor, Supported Function = [1], Not Supported = [0] xxxx x?xx - Not used on diesel vehicles at this time xxxx xx?x - NOx/SCR After-treatment Monitor, Supported Function = [1], Not Supported = [0] xxxx xxx? - NMHC Catalyst Monitor, Supported Function = [1], Not Supported = [0]


Field 4 = 0000 0000 - Readiness status of the supported systems ?xxx xxxx - EGR/VVT System monitor readiness status, Incomplete = [1], Complete = [0] x?xx xxxx - DPF readiness status, Incomplete = [1], Complete = [0] xx?x xxxx - Exhaust Gas Sensor monitor readiness status, Incomplete = [1], Complete = [0] xxx? xxxx - Not used on diesel vehicles at this time xxxx ?xxx - Boost pressure system monitor readiness Status, Incomplete = [1], Complete = [0] xxxx x?xx - Not used on diesel vehicles at this time xxxx xx?x - Readiness status of NOx/SCR After-treatment Monitor, Incomplete = [1], Complete = [0] xxxx xxx? - Readiness status of NMHC Catalyst Monitor, Incomplete = [1], Complete = [0]


- Abbreviations - DPF = Diesel Particle Filter NOx = Oxides of nitrogen SCR = Selective catalytic reduction systems NMHC = Non-methane hydrocarbons EGR = Exhaust Gas Recirculation VVT = Variable valve timing


- Ignition Type - Spark = Gasoline Compression = Diesel