User:Peter

Electronic Damping Control J250 - Basic Settings

[Select]
[14 - Susp. Elect]
[Meas. Blocks - 08]
Note the values stores in:
Group-054 Field-1 = G78( _Sensor)Min value
Group-054 Field-2 = G78( _Sensor)Max value
Group-055 Field-1 = G289( _Sensor)Min value
Group-055 Field-2 = G289( _Sensor)Max value

Look at:
Group-003 Field-1,2,3 - If the values are with in the range of the Min - Max
Basic settings can be performed, if not inspect suspension.

[Security Access - 16]
Enter 31564, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 001 [Go!]

The New values should be displayed.
- To check the learned values, check Measuring Value Group-008.
[Meas. Blocks - 08]
Enter [008] - Go!
The values displayed should be the learned values as displayed in the Basic Settings window.