Difference between revisions of "VAG-COM-FAQ-5.2"

From Ross-Tech Wiki
 
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
'''Important Note: This page is only relevant if you're using an older or 3rd-party "dumb" interface.  All our current interfaces have the activation for VAG-COM stored in the interface itself.'''
 +
<br>
 +
<br>
 
'''5.2  What's the De-Activate button for?  Why would I want to do that?'''
 
'''5.2  What's the De-Activate button for?  Why would I want to do that?'''
−
 
+
<br>
−
    Two reasons:
+
Two reasons:
−
 
+
*To move your activated copy of VAG-COM permanently from one PC to another.  See the previous question.
−
        *
+
*Some things you might want to do to your PC will kill the Activation.  If you're going to re-install Windows or update to different version of Windows, re-format or re-partition, or replace your hard drive, then you're going to loose your Activation anyway, and you'll need to ask us for a new activation code when you're done.  Sometimes we can tell from the Serial Number that you're requesting a new activation for the same PC.  Sometimes we can't.  It depends on exactly what you've changed.  Now you can always get a new Activation with no questions asked IF you are a registered Ross-Tech  customer and you supply proof of de-activation from a previous installation.  So if you're about to undertake surgery on your PC, please use the De-Activate function first.   
−
 
+
<br>
−
          To move your activated copy of VAG-COM permanently from one PC to another.  See the previous question.
+
To De-Activate, simply go to the [http://www.ross-tech.com/vag-com/tour/about_screen.html About Screen] and press the Register/Activate/Transfer button. Next you will see a button labeled as "De-Activate". Press the De-Activate Button. Doing so will generate a "Proof of De-Activation" code which you can copy and paste into the appropriate [http://www.ross-tech.com/vca Registration Form] using the serial number from the About screen. The "Proof of De-Activation" code is also written to a file called DE-ACT.TXT which you can easily put on a floppy disk for safe keeping.
−
        *
+
<br>
−
 
+
Note:  A De-Activation code cannot be used to activate a new installation of VAG-COM!  You must fill out the appropriate [http://www.ross-tech.com/vca Registration Form] to receive a new Activation Code.
−
          Some things you might want to do to your PC will kill the Activation.  If you're going to re-install Windows or update to different version of Windows, re-format or re-partition, or replace your hard drive, then you're going to loose your Activation anyway, and you'll need to ask us for a new activation code when you're done.  Sometimes we can tell from the Serial Number that you're requesting a new activation for the same PC.  Sometimes we can't.  It depends on exactly what you've changed.  Now you can always get a new Activation with no questions asked IF you are a registered Ross-Tech  customer and you supply proof of de-activation from a previous installation.  So if you're about to undertake surgery on your PC, please use the De-Activate function first.   
 
−
 
 
−
    To De-Activate, simply go to the About Screen and press the Register/Activate/Transfer button. Next you will see a button labeled as "De-Activate". Press the De-Activate Button. Doing so will generate a "Proof of De-Activation" code which you can copy and paste into the appropriate Registration Form using the serial number from the About screen. The "Proof of De-Activation" code is also written to a file called DE-ACT.TXT which you can easily put on a floppy disk for safe keeping.
 
−
 
 
−
    Note:  A De-Activation code cannot be used to activate a new installation of VAG-COM!  You must fill out the appropriate Registration Form to receive a new Activation Code.
 

Latest revision as of 18:24, 26 January 2006

Important Note: This page is only relevant if you're using an older or 3rd-party "dumb" interface. All our current interfaces have the activation for VAG-COM stored in the interface itself.

5.2 What's the De-Activate button for? Why would I want to do that?
Two reasons:

  • To move your activated copy of VAG-COM permanently from one PC to another. See the previous question.
  • Some things you might want to do to your PC will kill the Activation. If you're going to re-install Windows or update to different version of Windows, re-format or re-partition, or replace your hard drive, then you're going to loose your Activation anyway, and you'll need to ask us for a new activation code when you're done. Sometimes we can tell from the Serial Number that you're requesting a new activation for the same PC. Sometimes we can't. It depends on exactly what you've changed. Now you can always get a new Activation with no questions asked IF you are a registered Ross-Tech customer and you supply proof of de-activation from a previous installation. So if you're about to undertake surgery on your PC, please use the De-Activate function first.


To De-Activate, simply go to the About Screen and press the Register/Activate/Transfer button. Next you will see a button labeled as "De-Activate". Press the De-Activate Button. Doing so will generate a "Proof of De-Activation" code which you can copy and paste into the appropriate Registration Form using the serial number from the About screen. The "Proof of De-Activation" code is also written to a file called DE-ACT.TXT which you can easily put on a floppy disk for safe keeping.
Note: A De-Activation code cannot be used to activate a new installation of VAG-COM! You must fill out the appropriate Registration Form to receive a new Activation Code.

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=VAG-COM-FAQ-5.2&oldid=1551"