Difference between revisions of "VW Crafter (2E)"

From Ross-Tech Wiki
Line 16: Line 16:
 
|DLC=The DLC is located in the Driver Footwell<br>near the Pedals behind a Cover.
 
|DLC=The DLC is located in the Driver Footwell<br>near the Pedals behind a Cover.
 
}}
 
}}
'''Please Note''' that the VW Crafter (2E/2F) is based on and most identical to the Mercedes Sprinter, this also means that Diagnostics are very much Mercedes like and details may vary from your existing Volkswagen Diagnostic Experience. Specifically the Addresses used for Control Modules and the Functions supported by them differ from normal Volkswagen Models. Even though the Crafter does use CAN/UDS for Diagnostics, it does not have a Gateway as found in Volkswagen Models. Therefor you have to Select the '''Crafter/LT3 (2E)''' in the Auto-Scan instead of using the '''Automatic Detection'''.
+
'''Please Note''' that the VW Crafter (2E/2F) is based on the very similar Mercedes Sprinter; this means that diagnostics are more Mercedes-like and will be somewhat different that what you may be used to if you have experience with VW/Audi diagnostics. Specifically control module addresses and diagnostic functions supported by the control modules differ from normal VW/Audi models. Even though the Crafter does use CAN/UDS for diagnostics, it does not have a Gateway as found in VW/Audi models. Therefore you must select '''Crafter/LT3 (2E)''' in the Auto-Scan drop-down instead of using '''Auto Detect'''.
  
Since most Control Modules are Mercedes based, their Part Numbers shown via Diagnostics may not be identical to the Part Numbers shown in the Volkswagen Parts Catalog. At the Present Time VCDS does not fully Support those Mercedes based Control Modules (please refer to the current Release or Beta Version for a List of Supported Features), the 3 Control Modules (Engine, Immobilizer and Central Locking) using Volkswagen based Diagnostics are fully supported though.
+
Since most of the control modules in a Crafter are Mercedes based, the part numbers shown via diagnostics may not match their part numbers in the Volkswagen Parts Catalog. At the present time VCDS only has limited support for the control modules which are supplied by Mercedes; please refer to Release Notes on the download page for the version of the software you are using for list of supported functions.  In most Crafters, 3 control modules (Engine, Immobilizer and Central Locking) use native Volkswagen diagnostic methods and these are fully supported.
  
 
'''General Information''' about this Model can be found in the [http://en.wikipedia.org/wiki/Volkswagen_Crafter Wikipedia entry].
 
'''General Information''' about this Model can be found in the [http://en.wikipedia.org/wiki/Volkswagen_Crafter Wikipedia entry].

Revision as of 08:40, 3 September 2011


VW Crafter (2E/2F)
VW-Crafter2E.jpg
Source: Volker Konopka Wikipedia.gif
Information
Manufacturer: Daimler AG / Volkswagen AG
Chassis Code: 2E/2F
Platform: VN84X/LT3
Model Years: from 2006
Model Years (US): -
Predecessor: VW LT (2D)
Successor: None
Interface Hardware
HEX+CAN
DLC Location
271px

The DLC is located in the Driver Footwell
near the Pedals behind a Cover.

Please Note that the VW Crafter (2E/2F) is based on the very similar Mercedes Sprinter; this means that diagnostics are more Mercedes-like and will be somewhat different that what you may be used to if you have experience with VW/Audi diagnostics. Specifically control module addresses and diagnostic functions supported by the control modules differ from normal VW/Audi models. Even though the Crafter does use CAN/UDS for diagnostics, it does not have a Gateway as found in VW/Audi models. Therefore you must select Crafter/LT3 (2E) in the Auto-Scan drop-down instead of using Auto Detect.

Since most of the control modules in a Crafter are Mercedes based, the part numbers shown via diagnostics may not match their part numbers in the Volkswagen Parts Catalog. At the present time VCDS only has limited support for the control modules which are supplied by Mercedes; please refer to Release Notes on the download page for the version of the software you are using for list of supported functions. In most Crafters, 3 control modules (Engine, Immobilizer and Central Locking) use native Volkswagen diagnostic methods and these are fully supported.

General Information about this Model can be found in the Wikipedia entry.


[01/91] - Engine

Diesel Engines

[93] - Immobilizer

[94] - Airbags

[95] - Brake Electronics

[96] - Instrument Cluster

[97] - Trip Recorder

[99] - Ignition Switch

[9A] - Central Locking

[9B] - Driver Door

[9C] - Heating / Air Conditioning

[9E] - Auxiliary Heater (Electric)

[9F] - Stationary Heater (Water)

[A0] - Radio

[B1] - Upper/Roof Console

[B3] - Trailer Module

[B4] - Central Electronics

[B6] - Steering Wheel Electronics