VW Golf (1K) Comfort System

From Ross-Tech Wiki
Revision as of 08:49, 4 April 2006 by RtWiKiSyS0p (talk | contribs)

Coding

Adaptation

Channel 000: Remote Control Clearing

[Select]
[46 - Comfort System]
[Adaptation - 10]
Channel 000.
[Read]
To clear all matched remote controls press save.
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]


Channel 001: Remote Control Matching

[Select]
[46 - Comfort System]
[Adaptation - 10]
Channel 001.
[Read]

Note: The value does NOT show the actual number of adapted remotes.

  • 0 = All memory positions occupied, matching of additionals keys not possible, clear memory positons first.
  • 1 = Matching of additional remotes possible.


  • Start matching new/additional remotes with entering "1" as new value.

[Test]
[Save]

Note: The time for matching remotes after saving the new value should not exceed 30 seconds. You can add a maximum of 4 remotes.

  • Press the unlock button on each remote control you want to add, the blinkers will light up to confirm the adaptation process of each remote.

[Done, Go Back]
[Close Controller, Go Back - 06]


Special Procedures

Remote Control Synchronisation

  • If locked, open the car using the drivers door lock.
  • Press the remote control unlock button.
  • Put the key in the ignition lock and switch on ignition.
  • Switch off ignition and pull the key out of the ignition lock.
  • Press the remote control lock or unlock button.

The synchronisation is now finished.