Difference between revisions of "VW Golf (1K) Headlight Aim Control (Xenon with AFS)"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) |
||
| Line 10: | Line 10: | ||
* 0000015 = Seat Altea/Toledo (5P) and Leon (1P) Left-Hand-Drive | * 0000015 = Seat Altea/Toledo (5P) and Leon (1P) Left-Hand-Drive | ||
* 0000016 = Seat Altea/Toledo (5P) and Leon (1P) Right-Hand-Drive | * 0000016 = Seat Altea/Toledo (5P) and Leon (1P) Right-Hand-Drive | ||
| + | |||
| + | |||
| + | == Adaptation == | ||
| + | == Security Access == | ||
| + | |||
| + | * 15284 = Adaptation Enabling | ||
| + | |||
| + | |||
| + | == Basic Setting == | ||
| + | === Headlight Adjustment === | ||
| + | |||
| + | '''[Select]'''<br> | ||
| + | '''[55 - Xenon Range]'''<br> | ||
| + | '''[Basic Settings - 04]'''<br> | ||
| + | Group 001<br> | ||
| + | '''[Go!]'''<br> | ||
| + | Activate the Basic Setting.<br> | ||
| + | '''[ON/OFF/Next]'''<br> | ||
| + | * The meas. block field now shows "Wait" and should switch to "Adjust Headlights" then (this may take up to 10 seconds). | ||
| + | * Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target. | ||
| + | '''[ON/OFF/Next]'''<br> | ||
| + | The adjustment should now be learned.<br> | ||
| + | '''[Done, Go Back]'''<br> | ||
| + | Don't forget to check/clear fault codes afterwards.<br> | ||
| + | '''[Close Controller, Go Back - 06]'''<br> | ||
Revision as of 00:06, 8 March 2007
Coding
- 0000001 = VW Passat (3C) Left-Hand-Drive / Rest of World
- 0000004 = VW Golf/Jetta (1K/5M) Left-Hand-Drive / Rest of World
- 0000006 = VW Passat (3C) Right-Hand-Drive / Rest of World
- 0000007 = VW Passat (3C) Left-Hand-Drive / North America
- 0000012 = VW Golf/Jetta (1K/5M) Right-Hand-Drive / Rest of World
- 0000013 = VW Golf/Jetta (1K/5M) Left-Hand-Drive / North America
- 0000015 = Seat Altea/Toledo (5P) and Leon (1P) Left-Hand-Drive
- 0000016 = Seat Altea/Toledo (5P) and Leon (1P) Right-Hand-Drive
Adaptation
Security Access
- 15284 = Adaptation Enabling
Basic Setting
Headlight Adjustment
[Select]
[55 - Xenon Range]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
- The meas. block field now shows "Wait" and should switch to "Adjust Headlights" then (this may take up to 10 seconds).
- Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target.
[ON/OFF/Next]
The adjustment should now be learned.
[Done, Go Back]
Don't forget to check/clear fault codes afterwards.
[Close Controller, Go Back - 06]