Difference between revisions of "VW Golf (5K) Instrument Cluster"
From Ross-Tech Wiki
| Line 22: | Line 22: | ||
It may be necessary to cycle the key before the service warning is cleared.<br> | It may be necessary to cycle the key before the service warning is cleared.<br> | ||
| − | + | ||
| + | ---- | ||
| + | |||
| + | === Special Notes === | ||
| + | |||
| + | * If an Adaptation Error warning indicating that the control module is Uninitialized you must let VCDS write defaults to the WSC, Importer and Equipment numbers before the value can be changed. Click '''[Yes]''' followed by '''[Do It!]'''<br> | ||
| + | |||
| + | http://wiki.ross-tech.com/wiki/images/a/a2/Adaptation_Error_WSC_small.PNG | ||
| + | |||
| + | |||
| + | |||
* Most North American vehicles with the UDS/ODX protocol instrument clusters have a "Reset" that can be accessed via the MFA, without a scan tool. Pictures here:<br> | * Most North American vehicles with the UDS/ODX protocol instrument clusters have a "Reset" that can be accessed via the MFA, without a scan tool. Pictures here:<br> | ||
# [http://i778.photobucket.com/albums/yy64/Dana_at_Ross-Tech/Cluster/DSC02170.jpg Service Menu] | # [http://i778.photobucket.com/albums/yy64/Dana_at_Ross-Tech/Cluster/DSC02170.jpg Service Menu] | ||
# [http://i778.photobucket.com/albums/yy64/Dana_at_Ross-Tech/Cluster/DSC02173.jpg Service Reset] | # [http://i778.photobucket.com/albums/yy64/Dana_at_Ross-Tech/Cluster/DSC02173.jpg Service Reset] | ||
# [http://i778.photobucket.com/albums/yy64/Dana_at_Ross-Tech/Cluster/DSC02171.jpg Service Info]<br> | # [http://i778.photobucket.com/albums/yy64/Dana_at_Ross-Tech/Cluster/DSC02171.jpg Service Info]<br> | ||
Revision as of 14:00, 14 June 2011
Coding
Coding information is available while connected to the vehicle with VCDS using the [Long Coding Helper].
Adaptation
Service Reminder
Unlike previous models that used the [SRI Reset] function, the newer protocol UDS/ODX modules do not support conventional Adaptation Channels. The [SRI Reset] will not work and will result in a message like this:
To Reset the Service Reminder the procedure will need to be done manually:
[17 - Instruments]
[Adaptation - 10]
Choose "ESI: Resetting ESI" from the drop-down menu.
Choose Reset from the drop-down menu
[Do It!]
It may be necessary to cycle the key before the service warning is cleared.
Special Notes
- If an Adaptation Error warning indicating that the control module is Uninitialized you must let VCDS write defaults to the WSC, Importer and Equipment numbers before the value can be changed. Click [Yes] followed by [Do It!]
- Most North American vehicles with the UDS/ODX protocol instrument clusters have a "Reset" that can be accessed via the MFA, without a scan tool. Pictures here:
