VW Golf (5K) Instrument Cluster

From Ross-Tech Wiki
Revision as of 17:38, 25 August 2011 by Dana (talk | contribs)

Coding

Coding information is available while connected to the vehicle with VCDS using the [Long Coding Helper].

Adaptation

Service Reminder

Unlike previous models that used the [SRI Reset] function, the newer protocol UDS/ODX modules do not support conventional Adaptation Channels. The [SRI Reset] will not work and will result in a message like this:

SRI_-_UDS_-_ESI.png

To Reset the Service Reminder the procedure will need to be done manually:

[17 - Instruments]
[Adaptation - 10]
Choose "ESI: Resetting ESI" from the drop-down menu.
ESI_w-options.png
Choose Reset from the drop-down menu
[Do It!]
It may be necessary to cycle the key before the service warning is cleared.

Modify Service Intervals

If you choose to modify the factory default service interval Mileage and Time settings in Fixed (non flexible) configurations:

  • Look at the Adaptation choices and choose
    • "SID: maximum value of distance to service"
    • "SID: maximum value of time to service"



Special Notes

  • If an Adaptation Error warning indicating that the control module is Uninitialized you must let VCDS write defaults to the WSC, Importer and Equipment numbers before the value can be changed. Click [Yes] followed by [Do It!]

Adaptation_Error_WSC_small.PNG


  • Most North American vehicles with the UDS/ODX protocol instrument clusters have a "Reset" that can be accessed via the MFA, without a scan tool. Pictures here:
  1. Service Menu
  2. Service Reset
  3. Service Info