Difference between revisions of "VW Golf VII (5G/AU) CAN Gateway"
From Ross-Tech Wiki
(Created page with "__FORCETOC__ == Coding == Use the Installation List function to check or uncheck the modules installed in the vehicle. == Adaptation == Mk7 based cars like this should sup...") |
|||
| Line 13: | Line 13: | ||
*[19 - CAN Gateway] | *[19 - CAN Gateway] | ||
*[Adaptation - 10] | *[Adaptation - 10] | ||
| − | *From the Channel pulldown menu, select "Transport mode" | + | *From the Channel pulldown menu, select "IDE00002 Transport mode" |
*The stored value will show "Transport mode" | *The stored value will show "Transport mode" | ||
*Use the New Value pulldown menu to select "not active" | *Use the New Value pulldown menu to select "not active" | ||
*[Do It!] | *[Do It!] | ||
Latest revision as of 09:34, 15 February 2017
Coding
Use the Installation List function to check or uncheck the modules installed in the vehicle.
Adaptation
Mk7 based cars like this should support the following method for turning off transport mode:
Make sure the key is ON but the engine is OFF.
- [Select]
- [19 - CAN Gateway]
- [Adaptation - 10]
- From the Channel pulldown menu, select "IDE00002 Transport mode"
- The stored value will show "Transport mode"
- Use the New Value pulldown menu to select "not active"
- [Do It!]