Difference between revisions of "VW Passat (3C) Airbag"
RtWiKiSyS0p (talk | contribs) m |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 17: | Line 17: | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
'''[15 - Airbags]'''<br> | '''[15 - Airbags]'''<br> | ||
| − | '''[ | + | '''[Security Access - 16]'''<br> |
| − | Enter 30475 | + | Enter 30475 or 20324 to enable the basic setting. Note: It is unclear which of these is correct; it seems there may be two different variants of these modules, using two different Security Access codes, and we are not sure how to tell which one is which.<br> |
'''[Do it!]'''<br> | '''[Do it!]'''<br> | ||
'''[Basic Settings - 04]'''<br> | '''[Basic Settings - 04]'''<br> | ||
| Line 26: | Line 26: | ||
'''[ON/OFF/Next]'''<br> | '''[ON/OFF/Next]'''<br> | ||
The reset has been performed.<br> | The reset has been performed.<br> | ||
| − | '''[Done, Go Back]'''<br><br> | + | '''[Done, Go Back]'''<br> |
| + | '''[Close Controller, Go Back - 06]'''<br><br> | ||
== Special Procedures == | == Special Procedures == | ||
| Line 43: | Line 44: | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
'''[15 - Airbags]'''<br> | '''[15 - Airbags]'''<br> | ||
| − | '''[ | + | '''[Security Access - 16]'''<br> |
Enter 30475, to enable the basic setting.<br> | Enter 30475, to enable the basic setting.<br> | ||
'''[Do it!]'''<br> | '''[Do it!]'''<br> | ||
| Line 50: | Line 51: | ||
'''[Read]'''<br> | '''[Read]'''<br> | ||
'''[Save]'''<br> | '''[Save]'''<br> | ||
| − | '''[Done, Go Back]'''<br><br> | + | '''[Done, Go Back]'''<br> |
| + | '''[Close Controller, Go Back - 06]'''<br><br> | ||
Latest revision as of 18:59, 14 April 2010
Coding
VAG-COM will automatically tell you a suggested coding (HEX interface required), otherwise contact us for assistance.
Adaptation
Used to deactivate individual airbag components (see repair manual for details).
Basic Setting
Seat Occupied Recognition Control Module (J706)
If the Seat Occupied Recognition Control Module (J706) or the seat itself have been replaced, the basic setting has to be performed.
[Select]
[15 - Airbags]
[Security Access - 16]
Enter 30475 or 20324 to enable the basic setting. Note: It is unclear which of these is correct; it seems there may be two different variants of these modules, using two different Security Access codes, and we are not sure how to tell which one is which.
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The reset has been performed.
[Done, Go Back]
[Close Controller, Go Back - 06]
Special Procedures
Seat Occupied Recognition Control Module (J706): Reset
If a repair on the Seat Occupied Recognition has been performed, a reset has to be performed too.
Prerequisites:
- Seat in normal position.
- Seat must NOT be occupied during the whole procedure.
- Seatbelt must NOT be plugged in.
- No faults in the system.
- Interior temperature must be between 0 °C and 37 °C (32 °F and 98 °F).
[Select]
[15 - Airbags]
[Security Access - 16]
Enter 30475, to enable the basic setting.
[Do it!]
[Adaptation - 10]
Channel 000
[Read]
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]