Difference between revisions of "VW Passat (3C) Central Electronics"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) (New page: __FORCETOC__ == Coding == == Adaptation == === Channel 000: Reset Adaptation Channels === Reset all adaptation channels back to the original factory values. === Channel 001: Coming-Home...) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 35: | Line 35: | ||
=== Channel 006: Load Management === | === Channel 006: Load Management === | ||
| − | * Range: 0... | + | * Range: 0...3 |
* Note: Only active if Byte 02 Bit 3 of Long Coding active. | * Note: Only active if Byte 02 Bit 3 of Long Coding active. | ||
| + | |||
| + | === Channel 007: Highbeam with Assistance Driving Light === | ||
| + | * 0 = inactive | ||
| + | * 1 = active | ||
| + | |||
| + | === Channel 008: Assistance Driving Light Activation/Deactivation Delay === | ||
| + | * Range: 0...10200 ms | ||
| + | * Resolution: 40 ms | ||
Revision as of 01:58, 8 October 2007
Coding
Adaptation
Channel 000: Reset Adaptation Channels
Reset all adaptation channels back to the original factory values.
Channel 001: Coming-Home Time
Time which the Coming-Home function will be active.
- Range: 10...60 Seconds
- Resolution: 10 Seconds
- Note: Only active if Byte 00 Bit 7 of Long Coding active.
Channel 002: Leaving-Home Time
Time which the Leaving-Home function will be active.
- Range: 10...60 Seconds
- Resolution: 10 Seconds
- Note: Only active if Byte 00 Bit 5 of Long Coding active.
Channel 003: Rear Window & Outside Mirror Heater Activation Time
Time which the Rear Window and Outside Mirror Heater will be active.
- Range: 1...254 Minutes
- Resolution: 1 Minute
Channel 004: Headlight Washer Activation Time
Time which the Headlight Washers will be active.
- Range: 50...10000 ms
- Resolution: 50 ms (Adaptation Value * Resolution = Actual Value)
- Note: Only active if Byte 01 Bit 1 of Long Coding active.
Channel 005: Footwell Lighting Dimming
- Range: 20...100 %
- Resolution: 1 %
- Note: Only active if Byte 00 Bit 1 of Long Coding active.
Channel 006: Load Management
- Range: 0...3
- Note: Only active if Byte 02 Bit 3 of Long Coding active.
Channel 007: Highbeam with Assistance Driving Light
- 0 = inactive
- 1 = active
Channel 008: Assistance Driving Light Activation/Deactivation Delay
- Range: 0...10200 ms
- Resolution: 40 ms