Difference between revisions of "VW Passat (3C) Parking Brake"

From Ross-Tech Wiki
m
Line 24: Line 24:
 
'''[ON/OFF/Next]'''<br>
 
'''[ON/OFF/Next]'''<br>
 
The brake pads are now opening.<br>
 
The brake pads are now opening.<br>
 +
'''''Important''''':  Wait 30 seconds after the brakes stop moving before carrying out the next step.<br>
 +
Due to a firmware problem in some modules, failure to wait can result in damage to the control module. <br>
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br><br>
 
'''[Close Controller, Go Back - 06]'''<br><br>
Line 39: Line 41:
 
'''[ON/OFF/Next]'''<br>
 
'''[ON/OFF/Next]'''<br>
 
The brake pads are now closing.<br>
 
The brake pads are now closing.<br>
 +
'''''Important''''':  Wait 30 seconds after the brakes stop moving before carrying out the next step. <br>
 +
Due to a firmware problem in some modules, failure to wait can result in damage to the control module.<br>
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br><br>
 
'''[Close Controller, Go Back - 06]'''<br><br>
Line 53: Line 57:
 
'''[ON/OFF/Next]'''<br>
 
'''[ON/OFF/Next]'''<br>
 
The brake pads are now opening and closing 3 times.<br>
 
The brake pads are now opening and closing 3 times.<br>
 +
'''''Important''''':  Wait 30 seconds after the brakes stop moving before carrying out the next step.<br>
 +
Due to a firmware problem in some modules, failure to wait can result in damage to the control module.<br>
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br><br>
 
'''[Close Controller, Go Back - 06]'''<br><br>

Revision as of 13:26, 6 July 2007


Coding

  • 0000010 = Parking Brake without Auto-Hold (North America)
  • 0000011 = Parking Brake without Auto-Hold (Rest of World / PR-UH1)
  • 0000012 = Parking Brake with Auto-Hold (Rest of World / PR-UH2)
  • 0000013 = Parking Brake with Auto-Hold (North America)

Adaptation

Basic Setting

Open Rear Parking Brake

Prerequisites:

  • Connect a battery charger.
  • Cycle the Parking Brake ON, then OFF first.

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
Important: Wait 30 seconds after the brakes stop moving before carrying out the next step.
Due to a firmware problem in some modules, failure to wait can result in damage to the control module.
[Done, Go Back]
[Close Controller, Go Back - 06]


Close Rear Parking Brake

Prerequisites:

  • Connect a battery charger.

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now closing.
Important: Wait 30 seconds after the brakes stop moving before carrying out the next step.
Due to a firmware problem in some modules, failure to wait can result in damage to the control module.
[Done, Go Back]
[Close Controller, Go Back - 06]


Function Test

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 010
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening and closing 3 times.
Important: Wait 30 seconds after the brakes stop moving before carrying out the next step.
Due to a firmware problem in some modules, failure to wait can result in damage to the control module.
[Done, Go Back]
[Close Controller, Go Back - 06]


Longitudinal Acceleration Sensor (G251)

See Brake Electronics for details.