Difference between revisions of "VW Passat (3C) Parking Brake"

From Ross-Tech Wiki
 
(16 intermediate revisions by 3 users not shown)
Line 2: Line 2:
  
 
== Coding ==
 
== Coding ==
Note: When replacing this Parking Brake Control Module it is necessary to save a complete Auto-Scan before repairs. The [[VW Passat (3C) Brake Electronics|ABS Module]] coding will be lost when the Parking Brake Module is replaced and you you MUST have a record of the existing coding or you won't be able re-code the ABS module!''<br>
+
Note: When replacing the Parking Brake Control Module it is necessary to save a complete Auto-Scan before performing repairs. The [[VW Passat (3C) Brake Electronics|ABS Module]] coding will be lost when the Parking Brake Module is replaced.  You MUST have a record of the existing coding or you won't be able re-code the ABS module!''<br>
  
  
Line 10: Line 10:
 
* 0000013 = Parking Brake with Auto-Hold (North America)<br><br>
 
* 0000013 = Parking Brake with Auto-Hold (North America)<br><br>
  
 +
The Parking Brake should be released (Off) or Coding may be rejected.  While pressing the brake pedal; cycle the EPB On, Off and confirm MVB 012.2 is Open (released/off) instead of Closed (clamped/on).
 +
<br>
 
== Basic Setting ==
 
== Basic Setting ==
 
'''Caution!'''
 
'''Caution!'''
 
* Do not perform any of these Basic Settings while the brakes are disassembled!  Opening, closing, function tests, and otherwise cycling the Electronic Parking brakes should only be done with the pads and calipers properly installed on the rotors.  
 
* Do not perform any of these Basic Settings while the brakes are disassembled!  Opening, closing, function tests, and otherwise cycling the Electronic Parking brakes should only be done with the pads and calipers properly installed on the rotors.  
 
* Please follow the procedures EXACTLY.  There's a reason for every step.  If you skip any prerequisites or other steps here, you are likely to experience "issues" for which no documented resolutions exist, in which case we will not be able to help you resolve them.
 
* Please follow the procedures EXACTLY.  There's a reason for every step.  If you skip any prerequisites or other steps here, you are likely to experience "issues" for which no documented resolutions exist, in which case we will not be able to help you resolve them.
 +
* It is strongly recommended to run a full Auto-Scan first thing to check for any preexisting faults!  There have been several reports of repair shops damaging the Electronic Parking Brake System when trying to do rear brakes, but not telling the customer and then sending the car out the door.
  
  
Line 20: Line 23:
 
* Connect a battery charger as per repair manual.
 
* Connect a battery charger as per repair manual.
 
* Ignition on, engine off.
 
* Ignition on, engine off.
* Cycle the Parking Brake ON, then OFF first.
+
* Cycle the Parking Brake ON, then OFF first. ''The normal hydraulic brake pedal must be applied before the EPB will operate.''
 +
** The parking brake MUST be OFF or Basic Settings cannot operate.  Measuring Block group 012.2 can be used to confirm if the status is Open (released/off) or Closed (clamped/on).
 
'''[Select]'''<br>
 
'''[Select]'''<br>
 
'''[53 - Parking Brake]'''<br>
 
'''[53 - Parking Brake]'''<br>
Line 32: Line 36:
 
Due to a firmware problem in some modules, failure to wait can result in damage to the control module. <br>
 
Due to a firmware problem in some modules, failure to wait can result in damage to the control module. <br>
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br><br>
+
'''[Close Controller, Go Back - 06]'''
 +
* Turn ignition off.
  
 
+
''The caliper pistons do not move back into the caliper, this is normal.''
''The caliper pistons do not move back into the caliper, this is normal.  The scan tool can now be disconnected and ignition shut off while mechanical repairs are performed.''
 
  
 
----
 
----
Line 42: Line 46:
 
'''<u>Prerequisites:</u>'''<br>
 
'''<u>Prerequisites:</u>'''<br>
 
* Connect a battery charger as per repair manual.
 
* Connect a battery charger as per repair manual.
 +
* The Parking Brake must be OFF before Basic Setting are possible.
 
'''[Select]'''<br>
 
'''[Select]'''<br>
 
'''[53 - Parking Brake]'''<br>
 
'''[53 - Parking Brake]'''<br>
Line 58: Line 63:
  
 
=== Function Test ===
 
=== Function Test ===
 
+
'''<u>Prerequisites:</u>'''<br>
 +
* Connect a battery charger as per repair manual.
 +
* The Parking Brake must be OFF before Basic Setting are possible.
 
'''[Select]'''<br>
 
'''[Select]'''<br>
 
'''[53 - Parking Brake]'''<br>
 
'''[53 - Parking Brake]'''<br>
Line 73: Line 80:
  
 
----
 
----
 +
 
=== Longitudinal Acceleration Sensor (G251) ===
 
=== Longitudinal Acceleration Sensor (G251) ===
  
Line 92: Line 100:
 
Activate the Basic Setting.<br>
 
Activate the Basic Setting.<br>
 
'''[ON/OFF/Next]'''<br>
 
'''[ON/OFF/Next]'''<br>
The status of the Longitudinal Acceleration Sensor (G251) is now beeing displayed.<br>
+
The status of the Longitudinal Acceleration Sensor (G251) is now being displayed.<br>
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
To make sure the basic setting was succesful, check the sensor again.<br>
+
To make sure the basic setting was successful, check the sensor again.<br>
 
'''[Close Controller, Go Back - 06]'''<br><br>
 
'''[Close Controller, Go Back - 06]'''<br><br>
 
'''[03 - Brake Electronics]'''<br>
 
'''[03 - Brake Electronics]'''<br>
Line 106: Line 114:
 
== Replacement ==
 
== Replacement ==
  
After Replacing this Control Module these Steps have to be performed in the following Order:
+
After Replacing this Control Module these Steps have to be performed in the following order with a battery charger connected:
  
 
* [[VW Passat (3C) Brake Electronics#Coding|Code Brake Electronics (J104) Control Module]]
 
* [[VW Passat (3C) Brake Electronics#Coding|Code Brake Electronics (J104) Control Module]]
Line 118: Line 126:
  
 
''In case you are having trouble with procedure please [http://www.ross-tech.com/contact.html contact us directly] and we will assist you with the Coding Process. Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.''
 
''In case you are having trouble with procedure please [http://www.ross-tech.com/contact.html contact us directly] and we will assist you with the Coding Process. Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.''
 +
 +
== Video Link ==
 +
=== Electro-Mechanical Parking Brake (EPB): Rear Brake Service ===
 +
 +
[[File:Image4.jpg|200px|link=https://www.youtube.com/watch?v=C9AcboaVGzY]]
 +
 +
https://www.youtube.com/watch?v=C9AcboaVGzY

Latest revision as of 20:12, 6 July 2022


Coding

Note: When replacing the Parking Brake Control Module it is necessary to save a complete Auto-Scan before performing repairs. The ABS Module coding will be lost when the Parking Brake Module is replaced. You MUST have a record of the existing coding or you won't be able re-code the ABS module!


  • 0000010 = Parking Brake without Auto-Hold (North America)
  • 0000011 = Parking Brake without Auto-Hold (Rest of World / PR-UH1)
  • 0000012 = Parking Brake with Auto-Hold (Rest of World / PR-UH2)
  • 0000013 = Parking Brake with Auto-Hold (North America)

The Parking Brake should be released (Off) or Coding may be rejected. While pressing the brake pedal; cycle the EPB On, Off and confirm MVB 012.2 is Open (released/off) instead of Closed (clamped/on).

Basic Setting

Caution!

  • Do not perform any of these Basic Settings while the brakes are disassembled! Opening, closing, function tests, and otherwise cycling the Electronic Parking brakes should only be done with the pads and calipers properly installed on the rotors.
  • Please follow the procedures EXACTLY. There's a reason for every step. If you skip any prerequisites or other steps here, you are likely to experience "issues" for which no documented resolutions exist, in which case we will not be able to help you resolve them.
  • It is strongly recommended to run a full Auto-Scan first thing to check for any preexisting faults! There have been several reports of repair shops damaging the Electronic Parking Brake System when trying to do rear brakes, but not telling the customer and then sending the car out the door.


Open Rear Parking Brake

Prerequisites:

  • Connect a battery charger as per repair manual.
  • Ignition on, engine off.
  • Cycle the Parking Brake ON, then OFF first. The normal hydraulic brake pedal must be applied before the EPB will operate.
    • The parking brake MUST be OFF or Basic Settings cannot operate. Measuring Block group 012.2 can be used to confirm if the status is Open (released/off) or Closed (clamped/on).

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
Important: Wait 30 seconds after the brakes stop moving before carrying out the next step.
Due to a firmware problem in some modules, failure to wait can result in damage to the control module.
[Done, Go Back]
[Close Controller, Go Back - 06]

  • Turn ignition off.

The caliper pistons do not move back into the caliper, this is normal.


Close Rear Parking Brake

Prerequisites:

  • Connect a battery charger as per repair manual.
  • The Parking Brake must be OFF before Basic Setting are possible.

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now closing.
Important: Wait 30 seconds after the brakes stop moving before carrying out the next step.
Due to a firmware problem in some modules, failure to wait can result in damage to the control module.
[Done, Go Back]
[Close Controller, Go Back - 06]


Function Test

Prerequisites:

  • Connect a battery charger as per repair manual.
  • The Parking Brake must be OFF before Basic Setting are possible.

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 010
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening and closing 3 times.
Important: Wait 30 seconds after the brakes stop moving before carrying out the next step.
Due to a firmware problem in some modules, failure to wait can result in damage to the control module.
[Done, Go Back]
[Close Controller, Go Back - 06]


Longitudinal Acceleration Sensor (G251)

Prerequisites:

  • System voltage at least 12.0 V.

[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 4, the value has to be between -1.5 and +1.5 m/s².
[Done, Go Back]
[Close Controller, Go Back - 06]

[53 - Parking Brake]
[Basic Settings - 04]
Group 020
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The status of the Longitudinal Acceleration Sensor (G251) is now being displayed.
[Done, Go Back]
To make sure the basic setting was successful, check the sensor again.
[Close Controller, Go Back - 06]

[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 4, the value has to be between -2.5 and +2.5 m/s².
[Done, Go Back]
[Close Controller, Go Back - 06]

Replacement

After Replacing this Control Module these Steps have to be performed in the following order with a battery charger connected:

In case you are having trouble with procedure please contact us directly and we will assist you with the Coding Process. Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.

Video Link

Electro-Mechanical Parking Brake (EPB): Rear Brake Service

Image4.jpg

https://www.youtube.com/watch?v=C9AcboaVGzY