VW Phaeton (3D) OLD

From Ross-Tech Wiki

Airbag

Control Module Coding

Select 15 (Airbag) Coding -> Function 07

NOTE: Due to the great number of possible configurations (dependent on what equipment is installed in the car,
and what region the car is operated in), please contact us directly (include part number, component info and index).

CAN-Gateway

Control Module Coding

Select 19 (CAN-Gateway) Coding -> Function 07

+00002 - ABS installed
+00004 - Airbags installed

Central Electronics

Control Module Coding

Select 09 (Central Electronics) Coding -> Function 07

00001 - Daytime Running Lights on (Scandinavian Countries)
00002 - Daytime Running Lights on (USA and Canada)
00003 - Daytime Running Lights off (Rest of World)

NOTE: USA and Canada DRL setting provides low beam headlights on,
but not the instrument panel lighting or any other exterior lights normally used during darkness.

Comfort System

Control Module Coding

Select 46 (Comfort System) Coding -> Function 07

00032 - Low variant with basic door locking
00040 - Low variant with servo assisted door locking

Control Module Adaptation

Select 46 (Comfort System) Adaptation -> Function 10

-> Channel 001 (Door Unlocking)

0 – All door unlocking
1 – Selective door unlocking
2 – Both doors same side unlocking

-> Channel 002 (Auto-Lock)
The doors will lock automatically when the vehicle reaches a speed of 15 km/h or 10 mph (0 = off/1 = on).

-> Channel 003 (Auto-Unlock)
The doors will unlock automatically when the key is removed from the ignition switch (0 = off/1 = on).

-> Channel 004 (Unlocking Message - Kessy)
Return message when unlocking via Access/Start Authorization (Kessy).

0 - No return message
1 - Beep
2 - Blink
3 - Beep & Blink

-> Channel 005 (Unlocking Message - Remote)
Return message when unlocking via remote control.

0 - No return message
1 - Beep
2 - Blink
3 - Beep & Blink

-> Channel 006 (Unlocking Message - Key)
Return message when unlocking via key switch.

0 - No return message
1 - Beep
2 - Blink
3 - Beep & Blink

-> Channel 007 (Locking Message - Kessy)
Return message when locking via Access/Start Authorization (Kessy).

0 - No return message
1 - Beep
2 - Blink
3 - Beep & Blink

-> Channel 008 (Locking Message - Remote)
Return message when locking via remote control.

0 - No return message
1 - Beep
2 - Blink
3 - Beep & Blink

-> Channel 009 (Locking Message - Key)
Return message when locking via key switch.

0 - No return message
1 - Beep
2 - Blink
3 - Beep & Blink

-> Channel 010 (Active Message - Anti-Theft)
Return message when anti theft warning system is active.

0 - No return message
1 - Beep
2 - Blink
3 - Beep & Blink

-> Channel 011 (Country Setting)
Country setting for alarm horn.

1 - Rest of Europe
2 - Germany
3 - Great Britain

-> Channel 025 (Comfort Function)
This function activates/deactivates the comfort function via remote (0 = off/1 = on).

-> Channel 026 (Anti-Theft Delay)
Deactivation of the anti theft warning delay, when opening drivers door, before the anti theft warning system is beeing activated (1 = off/0 = on).