VW Phaeton (3D) OLD

From Ross-Tech Wiki
Revision as of 03:24, 24 November 2005 by RtWiKiSyS0p (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Airbag

Control Module Coding

Select 15 (Airbag) Coding -> Function 07

NOTE: Due to the great number of possible configurations (dependent on what equipment is installed in the car,
and what region the car is operated in), please contact us directly (include part number, component info and index).

CAN-Gateway

Control Module Coding

Select 19 (CAN-Gateway) Coding -> Function 07

+00002 - ABS installed
+00004 - Airbags installed

Central Electronics

Control Module Coding

Select 09 (Central Electronics) Coding -> Function 07

00001 - Daytime Running Lights on (Scandinavian Countries)
00002 - Daytime Running Lights on (USA and Canada)
00003 - Daytime Running Lights off (Rest of World)

NOTE: USA and Canada DRL setting provides low beam headlights on,
but not the instrument panel lighting or any other exterior lights normally used during darkness.

Comfort System

Control Module Coding

Select 46 (Comfort System) Coding -> Function 07

00032 - Low variant with basic door locking
00040 - Low variant with servo assisted door locking

Control Module Adaptation

Select 46 (Comfort System) Adaptation -> Function 10

-> Channel 01 (Door Unlocking)

0 – All door unlocking 1 – Selective door unlocking 2 – Both doors same side unlocking

-> Channel 02 (Auto-Lock) The doors will lock automatically when the vehicle reaches a speed of 15 km/h or 10 mph (0 = off/1 = on).

-> Channel 03 (Auto-Unlock) The doors will unlock automatically when the key is removed from the ignition switch (0 = off/1 = on).

-> Channel 04 (Unlocking Message - Kessy) Return message when unlocking via Access/Start Authorization (Kessy).

0 - No return message 1 - Beep 2 - Blink 3 - Beep & Blink

-> Channel 05 (Unlocking Message - Remote) Return message when unlocking via remote control.

0 - No return message 1 - Beep 2 - Blink 3 - Beep & Blink

-> Channel 06 (Unlocking Message - Key) Return message when unlocking via key switch.

0 - No return message 1 - Beep 2 - Blink 3 - Beep & Blink

-> Channel 07 (Locking Message - Kessy) Return message when locking via Access/Start Authorization (Kessy).

0 - No return message 1 - Beep 2 - Blink 3 - Beep & Blink

-> Channel 08 (Locking Message - Remote) Return message when locking via remote control.

0 - No return message 1 - Beep 2 - Blink 3 - Beep & Blink

-> Channel 09 (Locking Message - Key) Return message when locking via key switch.

0 - No return message 1 - Beep 2 - Blink 3 - Beep & Blink

-> Channel 10 (Active Message - Anti-Theft) Return message when anti theft warning system is active.

0 - No return message 1 - Beep 2 - Blink 3 - Beep & Blink

-> Channel 11 (Country Setting) Country setting for alarm horn.

1 - Rest of Europe 2 - Germany 3 - Great Britain 4 - not yet assigned

-> Channel 25 (Comfort Function) This function activates/deactivates the comfort function via remote (0 = off/1 = on).

-> Channel 26 (Anti-Theft Delay) Deactivation of the anti theft warning delay, when opening drivers door, before the anti theft warning system is beeing activated (1 = off/0 = on).