Difference between revisions of "VW Transporter (7H/7J) Slide Door"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
=== Channel 002: Initialization === | === Channel 002: Initialization === | ||
| − | + | Fully open the sliding door. Then start the Initialization by saving '''0''' as new value, afterwards manually close and re-open the sliding door, then perform a function test. | |
=== Channel 003: Electric Step Tread === | === Channel 003: Electric Step Tread === | ||
Latest revision as of 22:20, 17 September 2007
Adaptation
Channel 001: Remote Control Assignment
- 1 = Button 1 open & Button 2 close
- 2 = Button 1 close & Button 2 open
Channel 002: Initialization
Fully open the sliding door. Then start the Initialization by saving 0 as new value, afterwards manually close and re-open the sliding door, then perform a function test.
Channel 003: Electric Step Tread
- 0 = Electric Step Tread not installed
- 1 = Electric Step Tread installed