View source for 18042/P1634/005684

__FORCETOC__
== 18042/P1634 - Accelerator Position Sensor 2 (G185): Signal too High ==

==== Possible Symptoms ====

* Unknown

==== Possible Causes ====

* Wiring and/or connections faulty
* Sensor (G185) faulty

==== Possible Solutions ====

* Have a look at the Pedal Position Sensor assembly, not the Throttle Body.
* Check all connections between ECU and accelerator pedal - of course the pedal itself could be defective too.

==== Special Notes ====

* There are 2 sensors in the accelerator pedal, both measure the same except that they are working in opposite directions. This means one counts from 0 to 100, while the other one counts from 100 to 0.

[[Category:Fault Codes]]