View source for VW Touareg (7L) Heating/Air Conditioning

__FORCETOC__
== Coding ==

* '''000xx?0''': ''Glass Type''
** 2 = Standard Glass (Clear Glass)
** 3 = Thermal Protection Glass (Insulated/Acoustic Glass)
* '''000x?x0''': ''Roof''
** 0 = Solar Roof not installed
** 2 = Solar Roof installed
* '''000?xx0''': ''Refrigerant Loss Recognition''
** 0 = Refrigerant Temperature Sensor installed ''(Recognition activated)''
** 1 = Refrigerant Temperature Sensor not installed ''(Recognition deactivated)''


== Basic Setting ==
=== Normal (Potentiometer & Flap Adaptation) ===

'''<u>Prerequisites:</u>'''<br>
* Potentiometer / Flap replyed
* OR Climatronic Control Module (J255) replaced
* OR Climatronic Control Module (J255) recoded

'''[Select]'''<br>
'''[08 - Heating/Air Conditioning]'''<br>
'''[Basic Settings - 04]'''<br>
Group 001<br>
'''[Go!]'''<br>
Activate the Basic Setting.<br>
'''[ON/OFF/Next]'''<br>
The basic setting takes approximately 25 seconds.<br>
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br>


=== Service Position ===

'''<u>Notes:</u>'''<br>
* Has to be performed before ANY Actuators/Motors are being removed.
* While in Service Position the Display reads SF ''(German for "Servicefall")''.
* Make sure to have the Ignition OFF while working on the Actuators/Motors.
* Once all work has been done, switch ON the Ignition and perform the normal Basic Setting (Potentiometer & Flap Adaptation).

'''[Select]'''<br>
'''[08 - Heating/Air Conditioning]'''<br>
'''[Basic Settings - 04]'''<br>
Group 002<br>
'''[Go!]'''<br>
Activate the Basic Setting.<br>
'''[ON/OFF/Next]'''<br>
The Display should read '''SF'''now.<br>
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br>