View source for 17090/P0706/001798

== 17090/P0706/001798 - Transmission Range Sensor (F125): Implausible Signal==


==== Possible Symptoms ====

* No Reverse Lights
* Engine will not start (In 01J-CVT if Hall sensor 'D' fails)
* Incorrect gear selection
* PRNDL display may be flashing

==== Possible Causes ====

* Gear selector cable incorrectly adjusted
* F125-Transmission Range Sensor faulty
* Wiring or connection concerns
* In 01J-CVT Transmissions - Hall sensor or magnets concerns (there are four)

==== Possible Solutions ====

* Adjust gear selector cable
** Check Transmission Measuring Value Blocks
* Replace faulty F125-Transmission Range Sensor 
* Repair/replace wiring or connection concerns
* In 01J-CVT Transmissions 
** Check Transmission Measuring Value Block Group - 002
** Check Selector Shaft for magnet(s) damage
** Replace faulty J217-Transmission Controller (F125 is part of the J217) 


 


__FORCETOC__
[[Category:Fault Codes]]