View source for 28884/U0212/049682

__FORCETOC__

== U0212 - Steering Column Control Module: No Communication  ==

==== Possible Symptoms ====

* Malfunction Indicator Light (MIL) ON
* Cruise control system (CCS) warning light ON

==== Possible Causes ====

* Engine Control Module Software/Firmware Version faulty
** Check [[Official Factory Repair Information]] for applicable TSB/TPIs
* Incorrect CCS type enabled

==== Possible Solutions ====

* When found in the RoW market [[VW Tiguan (5N)]] with ECM part numbers ''03C-906-027-AB'' and ''03C-906-027-CD'' see TPI # 2024168/1 for a flash update to correct this DTC.
*  On all other models, confirm the correct CCS type is enabled.  The [[Checking Cruise Control using Measuring Values]] should be helpful.

==== Special Notes ====

* In some cases this DTC may be the end result of retrofitting CCS -or- an actual communication issue with the Steering Wheel Control Module.  If in doubt, run a complete Auto-Scan to see which control modules are installed and communicating.
* In other cases this DTC may be resolved by deactivating and reactivating CCS.
* When found in a MLB based chassis vehicle even though Address 16 is communicating directly make sure ALL fused powers to J527 are OK.  The example here may be helpful: https://forums.ross-tech.com/showthread.php?22543-Audi-A4-B8-Steering-Angle-sensor-no-signal-(G85)

[[Category:Fault Codes]]