View source for VW Jetta (AJ/16) Manual Heating/Air Conditioning

__FORCETOC__


== Coding ==

'''This module does not support coding!'''

== Basic Setting ==

* The Manual Heating/Air Conditioning controller does not require a scan tool to perform the Basic Settings for the Activation of the A/C Compressor, please use the following instructions below.
**Position the blower switch to the first or second speed
**Position the air distribution control to 'Vent'
**Position the interior temperature control to 'Cold', turn to the stop
**Start the Vehicle's engine while in Park/Neutral
**Simultaneously press/ hold  the AC and Defrost buttons until the AC and recirculation buttons illuminate
**Cycle the ignition and check for fault codes in the 08-Auto HVAC and proper HVAC system operation.

==== Special Notes ====

*This procedure above, must be competed when:
**The J301-Air conditioning system control unit is replaced.
**The fault code [[00898]]-005 will not clear.