00288 - Revision history

Jef: /* Special Notes */

2021-03-19T19:43:25Z

Special Notes

← Older revision		Revision as of 19:43, 19 March 2021
Line 32:		Line 32:
	* When found in the Volkswagen Passat 3C, please see this page [[VW Passat (3C) Immobilizer]]		* When found in the Volkswagen Passat 3C, please see this page [[VW Passat (3C) Immobilizer]]
	* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.		* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.
	* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to ~~2014~~).		* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2015).
	** https://static.nhtsa.gov/odi/tsbs/2015/MC-10120042-9999.pdf NHTSA		** https://static.nhtsa.gov/odi/tsbs/2015/MC-10120042-9999.pdf NHTSA
	* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. erWin offers some Immobilizer and Pass-Thru solutions which are mentioned under the notes section of our [[Official Factory Repair Information]] page.		* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. erWin offers some Immobilizer and Pass-Thru solutions which are mentioned under the notes section of our [[Official Factory Repair Information]] page.

Jef: /* Special Notes */

2021-03-19T19:43:02Z

Special Notes

← Older revision		Revision as of 19:43, 19 March 2021
Line 33:		Line 33:
	* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.		* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.
	* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).		* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).
			** https://static.nhtsa.gov/odi/tsbs/2015/MC-10120042-9999.pdf NHTSA
	* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. erWin offers some Immobilizer and Pass-Thru solutions which are mentioned under the notes section of our [[Official Factory Repair Information]] page.		* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. erWin offers some Immobilizer and Pass-Thru solutions which are mentioned under the notes section of our [[Official Factory Repair Information]] page.
	* Replacement with a used N360 is not supported.		* Replacement with a used N360 is not supported.

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Dana at 21:34, 6 December 2016

2016-12-06T21:34:43Z

← Older revision		Revision as of 21:34, 6 December 2016
Line 33:		Line 33:
	* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.		* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.
	* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).		* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).
	* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. erWin offers some Immobilizer and Pass-Thru solutions which are mentioned under the notes section of our [[Official Factory Repair]] ~~Information~~ page.		* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. erWin offers some Immobilizer and Pass-Thru solutions which are mentioned under the notes section of our [[Official Factory Repair Information]] page.
	* Replacement with a used N360 is not supported.		* Replacement with a used N360 is not supported.

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Peter: /* Special Notes */

2016-12-06T21:33:56Z

Special Notes

← Older revision		Revision as of 21:33, 6 December 2016
Line 33:		Line 33:
	* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.		* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.
	* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).		* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).
	* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. ~~Registered users can contact us directly via~~ [~~mailto:Support@Ross-Tech.com email~~] ~~about possible adaptation procedures for other immobilizer types (3 and 4A) . Inquiries must include the full Auto-Scan with VIN~~.		* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. erWin offers some Immobilizer and Pass-Thru solutions which are mentioned under the notes section of our [[Official Factory Repair]] Information page.
	* Replacement with a used N360 is not supported.		* Replacement with a used N360 is not supported.

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Peter: /* Special Notes */

2016-12-06T21:27:29Z

Special Notes

← Older revision		Revision as of 21:27, 6 December 2016
Line 30:		Line 30:
	** This will wake-up(activate) the CAN-Bus and may allow limited communication to the vehicle		** This will wake-up(activate) the CAN-Bus and may allow limited communication to the vehicle
	** If present clear the N360 fault code and if the vehicle's ignition power is now active, suspect a failed N360.		** If present clear the N360 fault code and if the vehicle's ignition power is now active, suspect a failed N360.
			* When found in the Volkswagen Passat 3C, please see this page [[VW Passat (3C) Immobilizer]]
	* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.		* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.
	* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).		* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).
	* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. Registered users can contact us directly via [mailto:Support@Ross-Tech.com email] about possible adaptation procedures for other immobilizer types (3 and 4A) . Inquiries must include the full Auto-Scan with VIN.		* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. Registered users can contact us directly via [mailto:Support@Ross-Tech.com email] about possible adaptation procedures for other immobilizer types (3 and 4A) . Inquiries must include the full Auto-Scan with VIN.
	* Replacement with a used N360 is not ~~recommended~~.		* Replacement with a used N360 is not supported.

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Peter: /* Special Notes */

2016-12-06T21:08:39Z

Special Notes

← Older revision		Revision as of 21:08, 6 December 2016
Line 26:		Line 26:

	==== Special Notes ====		==== Special Notes ====
	* If the ignition will not switch on, the communication with the Access Start controller is still maybe possible:		* If the ignition will not switch on, the communication with the Access Start controller still maybe possible, Try this:
	** Turn on the hazards, press the brake pedal and hold the flash to pass		** Turn on the hazards, press the brake pedal and hold the flash to pass
	** This will wake-up(activate) the CAN-Bus and allow limited communication to the vehicle		** This will wake-up(activate) the CAN-Bus and may allow limited communication to the vehicle
	** If present clear the N360 fault code and if the vehicle's ignition power is now active, suspect a failed N360.		** If present clear the N360 fault code and if the vehicle's ignition power is now active, suspect a failed N360.
	* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.		* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.
	* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).		* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).
	* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. Registered users can contact us directly via [mailto:Support@Ross-Tech.com email]. Inquiries must include the full Auto-Scan with VIN.		* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. Registered users can contact us directly via [mailto:Support@Ross-Tech.com email] about possible adaptation procedures for other immobilizer types (3 and 4A) . Inquiries must include the full Auto-Scan with VIN.
	* Replacement with a used N360 is not recommended.		* Replacement with a used N360 is not recommended.

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Peter: Created page with "== 00288 - Steering Column Lock Actuator (N360) == === 00288 - Steering Column Lock Actuator (N360): No Signal === === 00288 - Steering Column Lock Actuator (N360): Implausib..."

2016-12-06T21:02:32Z

Created page with "== 00288 - Steering Column Lock Actuator (N360) == === 00288 - Steering Column Lock Actuator (N360): No Signal === === 00288 - Steering Column Lock Actuator (N360): Implausib..."

New page

== 00288 - Steering Column Lock Actuator (N360) ==

=== 00288 - Steering Column Lock Actuator (N360): No Signal ===
=== 00288 - Steering Column Lock Actuator (N360): Implausible signal ===
=== 00288 - Steering Column Lock Actuator (N360): Open Circuit ===
=== 00288 - Steering Column Lock Actuator (N360):Open Circuit / Short to ground ===
=== 00288 - Steering Column Lock Actuator (N360): Open Circuit / Short to positive ===
=== 00288 - Steering Column Lock Actuator (N360): Electrical fault in Circuit ===
=== 00288 - Steering Column Lock Actuator (N360): Defective ===

==== Possible Symptoms ====

* Ignition power will NOT switch on
* Steering column will or will not lock

==== Possible Causes ====

* Wiring/Connections from/to N360
* Faulty N360

==== Possible Solutions ====

* Check wiring/connections from/to N360
* Check/Replace failed N360

==== Special Notes ====
* If the ignition will not switch on, the communication with the Access Start controller is still maybe possible:
** Turn on the hazards, press the brake pedal and hold the flash to pass
** This will wake-up(activate) the CAN-Bus and allow limited communication to the vehicle
** If present clear the N360 fault code and if the vehicle's ignition power is now active, suspect a failed N360.
* When found on the [[Audi A6/S6/RS6/allroad (4F)]] the N360 is part of the steering column and is not available separately from the Audi at this time.
* See TSB / TPI 2040593 for possible part/software update when found in Audi Q7 and A6 (2005 to 2014).
* Vehicles equipped with Immobilizer 4C or higher will require an online connection with VW/Audi/Bentley to correctly adapt the new N360 to the vehicle. Registered users can contact us directly via [mailto:Support@Ross-Tech.com email]. Inquiries must include the full Auto-Scan with VIN.
* Replacement with a used N360 is not recommended.

[[Category:Fault Codes]]