17656/P1248/004680 - Revision history

Jef: /* Special Notes */

2013-04-11T22:21:34Z

Special Notes

← Older revision		Revision as of 22:21, 11 April 2013
Line 27:		Line 27:
	* When stored in the VW (9M/1J) Golf/Jetta or (1C) Beetle with the ALH engine code Tech Tip 23-02-03 may be helpful. The summary involves removing power at idle to the N108 Cold Start Injection Valve (Fuse 34 on those body styles) while monitoring Basic Setting group 000.2 which is shown under "Timing" when using the [http://www.ross-tech.com/vag-scope/TDIGraph.html TDI Timing Checker]. When power is removed from N108 the live reading should change to 255.		* When stored in the VW (9M/1J) Golf/Jetta or (1C) Beetle with the ALH engine code Tech Tip 23-02-03 may be helpful. The summary involves removing power at idle to the N108 Cold Start Injection Valve (Fuse 34 on those body styles) while monitoring Basic Setting group 000.2 which is shown under "Timing" when using the [http://www.ross-tech.com/vag-scope/TDIGraph.html TDI Timing Checker]. When power is removed from N108 the live reading should change to 255.
	[[Category:Fault Codes]]		[[Category:Fault Codes]]

			== Video Link ==
			=== TDI VE Start of Injection ===

			[[File:Tdistartthumb.jpg\|200px\|link=http://www.youtube.com/watch?v=MEguZWbEE9g]]

			http://www.youtube.com/watch?v=MEguZWbEE9g

Dana at 03:15, 28 October 2011

2011-10-28T03:15:05Z

← Older revision		Revision as of 03:15, 28 October 2011
Line 20:		Line 20:
	* Check/Replace Fuse(s)		* Check/Replace Fuse(s)
	* Check/Repair Wiring/Connectors from/to Injection Valve (N108)		* Check/Repair Wiring/Connectors from/to Injection Valve (N108)
			** Run Output Tests

	==== Special Notes ====		==== Special Notes ====

	* Might by stored with other codes like [[17654/P1246/004678]].		* Might by stored with other codes like [[17654/P1246/004678]].
			* When stored in the VW (9M/1J) Golf/Jetta or (1C) Beetle with the ALH engine code Tech Tip 23-02-03 may be helpful. The summary involves removing power at idle to the N108 Cold Start Injection Valve (Fuse 34 on those body styles) while monitoring Basic Setting group 000.2 which is shown under "Timing" when using the [http://www.ross-tech.com/vag-scope/TDIGraph.html TDI Timing Checker]. When power is removed from N108 the live reading should change to 255.
	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Dana at 15:16, 18 January 2011

2011-01-18T15:16:18Z

← Older revision		Revision as of 15:16, 18 January 2011
Line 16:		Line 16:
	==== Possible Solutions ====		==== Possible Solutions ====

	* Check/Adjust Injection Start		* Check/Adjust Injection Start. See [http://www.ross-tech.com/vag-scope/TDIGraph.html TDI Timing Checker]
	* Check Fuel Supply		* Check Fuel Supply
	* Check/Replace Fuse(s)		* Check/Replace Fuse(s)

RtWiKiSyS0p at 16:15, 30 March 2007

2007-03-30T16:15:39Z

New page

__FORCETOC__
== 17656/P1248/004680 - Start of Injection Timing Regulation: Control Deviation ==

==== Possible Symptoms ====

* Loss of Power at high Engine Speeds
* Engine difficult to Start

==== Possible Causes ====

* Start of Injection Timing Regulation not OK
* Injection Pump Control Range blocked/dirty (e.g. by Metal Particles)
* Engine has stalled / ran out of Fuel recently
* Wiring/Connectors from/to Injection Valve (N108) faulty

==== Possible Solutions ====

* Check/Adjust Injection Start
* Check Fuel Supply
* Check/Replace Fuse(s)
* Check/Repair Wiring/Connectors from/to Injection Valve (N108)

==== Special Notes ====

* Might by stored with other codes like [[17654/P1246/004678]].

[[Category:Fault Codes]]