Audi A4 (8D) Central Locking - Revision history

Dana at 18:32, 30 August 2011

2011-08-30T18:32:11Z

← Older revision		Revision as of 18:32, 30 August 2011
Line 24:		Line 24:
	----		----
	=== Remote Control Matching ===		=== Remote Control Matching ===
			'''<u>Prerequisites:</u>'''<br>
			Ignition ON.<br>
			Two vehicle keys present.<br><br>
	'''[Select]'''<br>		'''[Select]'''<br>
	'''[35 - Central Locking]'''<br>		'''[35 - Central Locking]'''<br>

Dana at 18:30, 30 August 2011

2011-08-30T18:30:57Z

← Older revision		Revision as of 18:30, 30 August 2011
Line 6:		Line 6:

	'''<u>Prerequisites:</u>'''<br>		'''<u>Prerequisites:</u>'''<br>
	* Ignition ON.<br><br>		Ignition ON.<br><br>

	* Mechanically lock the car from the outside using the driver-side lock.		* Mechanically lock the car from the outside using the driver-side lock.
	* Press the remote control "unlock" button five times at one second intervals.		* Press the remote control "unlock" button five times at one second intervals.
Line 34:		Line 33:
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>
	'''[Close Controller, Go Back - 06]'''<br><br>		'''[Close Controller, Go Back - 06]'''<br><br>
	Lock the car from outside using the new, unmatched key in the driver-side door lock.~~<br><br>~~
	Press the UNLOCK button on the new key within 5 seconds often enough to reach next memory position (so, if the value in field 2 was 0001, you should press the new key's unlock button twice, to put the new key in memory position 2).~~<br><br>~~		* Leave the key in the ignition ON
	The car may give you some sort of acknowledgment as the button is pressed (lights flash, horn beep, etc.)~~<br><br>~~		* Lock the car from outside using the new, unmatched key in the driver-side door lock.
	Wait 5 seconds and press the unlock button on the new key to unlock the door.~~<br><br>~~		* Press the UNLOCK button on the new key within 5 seconds often enough to reach next memory position (so, if the value in field 2 was 0001, you should press the new key's unlock button twice, to put the new key in memory position 2).
	Turn the ignition key to OFF and remove the old key.~~<br><br>~~		** ''The car may give you some sort of acknowledgment as the button is pressed (lights flash, horn beep, etc.)''
	Press LOCK and UNLOCK with the new key.~~<br><br>~~		* Wait 5 seconds and press the unlock button on the new key to unlock the door.
	Insert the new key in the ignition and turn to the ON position (do not start car).<br><br>		* Turn the ignition key to OFF and remove the old key.
			* Press LOCK and UNLOCK with the new key.
			* Insert the new key in the ignition and turn to the ON position (do not start car).<br><br>
	'''[Select]'''<br>		'''[Select]'''<br>
	'''[35 - Central Locking]'''<br>		'''[35 - Central Locking]'''<br>
	'''[Measuring Blocks - 08]'''<br>		'''[Measuring Blocks - 08]'''<br>
	Group 003<br>		Group 003<br>
	'''[Go!]'''~~<br>~~<br>		'''[Go!]'''<br>
	The value in field 2 should now indicate 0011 in the example used, showing the old key still matched in position 1 and the new key matched in position 2.<br><br>		The value in field 2 should now indicate 0011 in the example used, showing the old key still matched in position 1 and the new key matched in position 2.<br><br>
	Make sure that new keys are always coded into free memory positions (where there is a zero in Group 003, field 2). If occupied positions (distinguishable by a "1") are used, the transmitter previously coded to this position will no longer work.~~<br>~~<br>		Make sure that new keys are always coded into free memory positions (where there is a zero in Group 003, field 2). If occupied positions (distinguishable by a "1") are used, the transmitter previously coded to this position will no longer work.<br>
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>
	'''[Close Controller, Go Back - 06]'''<br>		'''[Close Controller, Go Back - 06]'''<br>

Dana at 17:47, 4 April 2011

2011-04-04T17:47:39Z

RtWiKiSyS0p at 11:57, 4 April 2006

2006-04-04T11:57:55Z

@@ Line 1: / Line 1: @@
-=== Special Procedures ===
+== Coding ==
 '''[Select]'''<br>
@@ Line 5: / Line 30: @@
 '''[Measuring Blocks - 08]'''<br>
 Group 003<br>
-'''[Go!]'''<br><br>
+'''[Go!]'''<br>
-The value in field 2 shows how many remotes have been matched and in which memory positions (for example, "0001" indicates 1 transmitter in position 1).<br><br>
+The value in field 2 shows how many remotes have been matched and in which memory positions (for example, "0001" indicates 1 transmitter in position 1).<br>
 '''[Done, Go Back]'''<br>
 '''[Close Controller, Go Back - 06]'''<br><br>

RtWiKiSyS0p at 11:15, 4 April 2006

2006-04-04T11:15:14Z

← Older revision		Revision as of 11:15, 4 April 2006
Line 7:		Line 7:
	'''[Go!]'''<br><br>		'''[Go!]'''<br><br>
	The value in field 2 shows how many remotes have been matched and in which memory positions (for example, "0001" indicates 1 transmitter in position 1).<br><br>		The value in field 2 shows how many remotes have been matched and in which memory positions (for example, "0001" indicates 1 transmitter in position 1).<br><br>
			'''[Done, Go Back]'''<br>
			'''[Close Controller, Go Back - 06]'''<br><br>
	Lock the car from outside using the new, unmatched key in the driver-side door lock.<br><br>		Lock the car from outside using the new, unmatched key in the driver-side door lock.<br><br>
	Press the UNLOCK button on the new key within 5 seconds often enough to reach next memory position (so, if the value in field 2 was 0001, you should press the new key's unlock button twice, to put the new key in memory position 2).<br><br>		Press the UNLOCK button on the new key within 5 seconds often enough to reach next memory position (so, if the value in field 2 was 0001, you should press the new key's unlock button twice, to put the new key in memory position 2).<br><br>
Line 14:		Line 16:
	Press LOCK and UNLOCK with the new key.<br><br>		Press LOCK and UNLOCK with the new key.<br><br>
	Insert the new key in the ignition and turn to the ON position (do not start car).<br><br>		Insert the new key in the ignition and turn to the ON position (do not start car).<br><br>
			'''[Select]'''<br>
			'''[35 - Central Locking]'''<br>
			'''[Measuring Blocks - 08]'''<br>
			Group 003<br>
			'''[Go!]'''<br><br>
	The value in field 2 should now indicate 0011 in the example used, showing the old key still matched in position 1 and the new key matched in position 2.<br><br>		The value in field 2 should now indicate 0011 in the example used, showing the old key still matched in position 1 and the new key matched in position 2.<br><br>
	Make sure that new keys are always coded into free memory positions (where there is a zero in Group 003, field 2). If occupied positions (distinguishable by a "1") are used, the transmitter previously coded to this position will no longer work.<br><br>		Make sure that new keys are always coded into free memory positions (where there is a zero in Group 003, field 2). If occupied positions (distinguishable by a "1") are used, the transmitter previously coded to this position will no longer work.<br><br>
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>
	'''[Close Controller, Go Back - 06]'''<br>		'''[Close Controller, Go Back - 06]'''<br>

RtWiKiSyS0p at 11:13, 4 April 2006

2006-04-04T11:13:52Z

New page

=== Special Procedures ===

'''[Select]''' 
'''[35 - Central Locking]''' 
'''[Measuring Blocks - 08]''' 
Group 003 
'''[Go!]''' 
The value in field 2 shows how many remotes have been matched and in which memory positions (for example, "0001" indicates 1 transmitter in position 1). 
Lock the car from outside using the new, unmatched key in the driver-side door lock. 
Press the UNLOCK button on the new key within 5 seconds often enough to reach next memory position (so, if the value in field 2 was 0001, you should press the new key's unlock button twice, to put the new key in memory position 2). 
The car may give you some sort of acknowledgement as the button is pressed (lights flash, horn beep, etc.) 
Wait 5 seconds and press the unlock button on the new key to unlock the door. 
Turn the ignition key to OFF and remove the old key. 
Press LOCK and UNLOCK with the new key. 
Insert the new key in the ignition and turn to the ON position (do not start car). 
The value in field 2 should now indicate 0011 in the example used, showing the old key still matched in position 1 and the new key matched in position 2. 
Make sure that new keys are always coded into free memory positions (where there is a zero in Group 003, field 2). If occupied positions (distinguishable by a "1") are used, the transmitter previously coded to this position will no longer work. 
'''[Done, Go Back]''' 
'''[Close Controller, Go Back - 06]'''

← Older revision		Revision as of 17:47, 4 April 2011
Line 3:		Line 3:
	== Special Procedures ==		== Special Procedures ==
	=== Remote Control Clearing ===		=== Remote Control Clearing ===
	''Clearing of all memory ~~postions~~, e.g. in case of a lost key.''<br><br>		''Clearing of all memory potions, e.g. in case of a lost key.''<br><br>

	'''<u>Prerequisites:</u>'''<br>		'''<u>Prerequisites:</u>'''<br>
Line 11:		Line 11:
	* Press the remote control "unlock" button five times at one second intervals.		* Press the remote control "unlock" button five times at one second intervals.
	* Wait 6 seconds, then press remote control "unlock" button one more time to confirm this clearing procedure.		* Wait 6 seconds, then press remote control "unlock" button one more time to confirm this clearing procedure.
	''All memory positions are now erased, central locking should not be ~~operatable~~ via remote control.''		''All memory positions are now erased, central locking should not be operational via remote control.''


	----		----
	=== Remote Control ~~Synchronisation~~ ===		=== Remote Control Synchronization ===

	* Press any button on remote control.<br>		* Press any button on remote control.<br>
Line 36:		Line 36:
	Lock the car from outside using the new, unmatched key in the driver-side door lock.<br><br>		Lock the car from outside using the new, unmatched key in the driver-side door lock.<br><br>
	Press the UNLOCK button on the new key within 5 seconds often enough to reach next memory position (so, if the value in field 2 was 0001, you should press the new key's unlock button twice, to put the new key in memory position 2).<br><br>		Press the UNLOCK button on the new key within 5 seconds often enough to reach next memory position (so, if the value in field 2 was 0001, you should press the new key's unlock button twice, to put the new key in memory position 2).<br><br>
	The car may give you some sort of ~~acknowledgement~~ as the button is pressed (lights flash, horn beep, etc.)<br><br>		The car may give you some sort of acknowledgment as the button is pressed (lights flash, horn beep, etc.)<br><br>
	Wait 5 seconds and press the unlock button on the new key to unlock the door.<br><br>		Wait 5 seconds and press the unlock button on the new key to unlock the door.<br><br>
	Turn the ignition key to OFF and remove the old key.<br><br>		Turn the ignition key to OFF and remove the old key.<br><br>