Peter: Created page with "FORCETOC == Basic Setting == == Special Procedures == === J223-Rear spoiler activation === Perform the following when fault code '01507-Initialization Not Successful' is..."

2018-12-04T19:49:54Z

Created page with "__FORCETOC__ == Basic Setting == == Special Procedures == === J223-Rear spoiler activation === Perform the following when fault code '01507-Initialization Not Successful' is..."

New page

__FORCETOC__

== Basic Setting ==
== Special Procedures ==

=== J223-Rear spoiler activation ===
Perform the following when fault code '01507-Initialization Not Successful' is present.

Key on, engine running.

* Press the Rear Spoiler 'up' button, the rear spoiler will now deploy, then should retract in four steps.
or
* Drive the vehicle greater than 25km/h for a short distance, the code should clear or can be cleared and rear spoiler operation should be normal.

==Notes:==
If the code clears and the spoiler functions correctly, the initialization is completed.

If the Initialization fails, you can disconnect the J223 controller for 10-15 minutes, then repeat the above. And check the rear spoiler for any mechanical concerns, such as blockage or damage.

Bentley Continental (3W) Rear Spoiler - Revision history

Peter: Created page with "__FORCETOC__ == Basic Setting == == Special Procedures == === J223-Rear spoiler activation === Perform the following when fault code '01507-Initialization Not Successful' is..."

Peter: Created page with "FORCETOC == Basic Setting == == Special Procedures == === J223-Rear spoiler activation === Perform the following when fault code '01507-Initialization Not Successful' is..."