Peter: Created page with "== C1011 - Brake Pad Replacement Mode Active == ==== Possible Symptoms ==== * Brake Change warning in Instrument Cluster * Parking Brake function is not available ==== Poss..."

2024-10-24T14:04:04Z

Created page with "== C1011 - Brake Pad Replacement Mode Active == ==== Possible Symptoms ==== * Brake Change warning in Instrument Cluster * Parking Brake function is not available ==== Poss..."

New page

== C1011 - Brake Pad Replacement Mode Active ==

==== Possible Symptoms ====

* Brake Change warning in Instrument Cluster
* Parking Brake function is not available

==== Possible Causes ====

* Brake Change Mode Active

==== Possible Solutions ====

* Complete any repair work, use Basic Settings to "End lining change mode"

==== Special Notes ====
* The LED in the Parking Brake Switch and the Warning Lamp in the Instrument Cluster will likely continue to flash, accompanied by Fault Code C1011, indicating that brake pad replacement mode is active.
* This flashing warning should cease after completing the repair work and executing the Basic Settings for "End lining change mode." It may also be necessary to cycle the Parking Brake switch ON and then OFF while depressing the brake pedal

__FORCETOC__
[[Category:Fault Codes]]

C1011 - Revision history

Peter: Created page with "== C1011 - Brake Pad Replacement Mode Active == ==== Possible Symptoms ==== * Brake Change warning in Instrument Cluster * Parking Brake function is not available ==== Poss..."