Checking Cruise Control using Measuring Values - Revision history

Dana at 21:27, 16 March 2018

2018-03-16T21:27:05Z

← Older revision		Revision as of 21:27, 16 March 2018
Line 138:		Line 138:
	*On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.		*On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.
	** See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>		** See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>

			* If factory equipped CCS decides to stop working for no apparent reason in a 2011-2012 Jetta or Beetle with a 2.5L Gas engine make sure the letter '''G''' isn't missing from the Component field. For some reason we've received numerous reports like that from NAR market (US/Canadian) cars without any damage/repair history that would explain lost CCS. Simply turning it off and back on again via Login with key cycles in between has resolved all issues to date.

Dana at 21:30, 3 June 2016

2016-06-03T21:30:42Z

← Older revision		Revision as of 21:30, 3 June 2016
Line 5:		Line 5:
	=== DBW (Drive-by-Wire) ===		=== DBW (Drive-by-Wire) ===

	The CCS (Cruise Control System) activation in ~~the~~ DBW (Drive-by-Wire) throttle systems will vary depending on the Engine Control Module.		The CCS (Cruise Control System) activation in DBW (Drive-by-Wire) throttle systems will vary depending on the Engine Control Module.

	'''1)''' Control modules using '''Short Coding''' often use a Login code and the letter "'''G'''" is shown in the component field when activated.		'''1)''' Control modules using '''Short Coding''' often use a Login code and the letter "'''G'''" is shown in the component field when activated.
Line 33:		Line 33:
	* You may have to cycle the key off and back on before the CCS is activated and the letter "G" is shown in the component field.<br>		* You may have to cycle the key off and back on before the CCS is activated and the letter "G" is shown in the component field.<br>
	* The [[Throttle Body Alignment (TBA)]] may need to be completed before CCS operates.		* The [[Throttle Body Alignment (TBA)]] may need to be completed before CCS operates.
	* If ~~CCS needs~~ to ~~be de-activated use~~ the Login of: 16167		* Adaptive Cruise Control (ACC) uses the letter '''A''' instead of '''G''' in the component field.
			* If the incorrect Cruise Control type is activated it will be necessary to deactivate it using the Login of 16167 followed by a key cycle and enabling the proper type.

Jef: /* Diesel Engines */

2013-04-01T15:57:59Z

Diesel Engines

← Older revision		Revision as of 15:57, 1 April 2013
Line 92:		Line 92:
	\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = Brake Not Depressed \|\| style="background:lightblue" \|1 = Brake depressed (brake pedal switch)		\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = Brake Not Depressed \|\| style="background:lightblue" \|1 = Brake depressed (brake pedal switch)
	\|-		\|-
	\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| 0 = Clutch Not Depressed \|\| style="background:white" \|1 = Clutch Depressed (always 1 in Auto. Trans.)		\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| 0 = Clutch Not Depressed \|\| style="background:white" \|1 = Clutch Depressed (always 0 in Auto. Trans.)
	\|-		\|-
	\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = CCS Not active in ECM \|\| style="background:lightblue" \|1 = CCS active in ECM		\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = CCS Not active in ECM \|\| style="background:lightblue" \|1 = CCS active in ECM
Line 127:		Line 127:
	\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| N/A \|\| style="background:lightblue" \|N/A		\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| N/A \|\| style="background:lightblue" \|N/A
	\|}		\|}



	=== Special Notes ===		=== Special Notes ===

Dana at 20:35, 2 May 2012

2012-05-02T20:35:21Z

← Older revision		Revision as of 20:35, 2 May 2012
Line 9:		Line 9:
	'''1)''' Control modules using '''Short Coding''' often use a Login code and the letter "'''G'''" is shown in the component field when activated.		'''1)''' Control modules using '''Short Coding''' often use a Login code and the letter "'''G'''" is shown in the component field when activated.

			'''1.8T Gasoline example:'''
	Address 01: Engine Labels: 06A-906-032-AWP.lbl		Address 01: Engine Labels: 06A-906-032-AWP.lbl
	Part No: 06A 906 032 LP		Part No: 06A 906 032 LP
	Component: 1.8L R4/5VT '''G''' 0005		Component: 1.8L R4/5VT '''G''' 0005
	Coding: 07500		Coding: 07500
			'''1.9 CR TDI example:'''
			Address 01: Engine (CBE) Labels: 03L-906-022-CBE.clb
			Part No SW: 03L 997 016 N HW: 03L 906 022 J
			Component: R4 2,0L EDC '''G'''000SG 8680
			Coding: 0050072
	'''<u>Activating Cruise Control on a new (DBW) ECU using Login</u>'''<br>		'''<u>Activating Cruise Control on a new (DBW) ECU using Login</u>'''<br>

Dana at 03:36, 29 April 2011

2011-04-29T03:36:33Z

← Older revision		Revision as of 03:36, 29 April 2011
Line 125:		Line 125:


			=== Special Notes ===
			* When additional information is available in VCDS the binary values will appear in a balloon while connected to the vehicle. If there is a discrepancy with the details in the charts above, use the engine specific data in VCDS. <br>

			* On some vehicles equipped with an Automatic Transmission it may be necessary to test drive exceeding a speed of 30 km/h (19 mph) before voltage is supplied to the CCS switch.<br>

	~~'''Notes:'''~~
	* Some of the newer Engine Control Modules may use the UDS/ODX/ASAM protocols. Those modules do not support conventional Measuring Block Groups. [http://www.ross-tech.com/vcds/tour/adv-meas-blocks.html Advanced Measuring Values] will be used instead and you will check the boxes for CCS (or similar) to locate and view the readings.<br>		* Some of the newer Engine Control Modules may use the UDS/ODX/ASAM protocols. Those modules do not support conventional Measuring Block Groups. [http://www.ross-tech.com/vcds/tour/adv-meas-blocks.html Advanced Measuring Values] will be used instead and you will check the boxes for CCS (or similar) to locate and view the readings.<br>
	* When additional information is available in VCDS the binary values will appear in a balloon while connected to the vehicle. If there is a discrepancy with the details in the charts above, use the engine specific data in VCDS. <br>
	*On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.		*On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.
	** See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>		** See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>

Dana at 14:16, 12 April 2011

2011-04-12T14:16:24Z

← Older revision		Revision as of 14:16, 12 April 2011
Line 72:		Line 72:
	=== Gasoline Engines ===		=== Gasoline Engines ===

	Gasoline Engines often use Measuring Block 066 to display CCS info. Refer to the charts below using line Field 2 and 4 data.<br>		Gasoline Engines often use Measuring Block group 066 to display CCS info. Refer to the charts below using line Field 2 and 4 data.<br>

	=== Diesel Engines ===		=== Diesel Engines ===

	Diesel Engines often use Measuring Block 006 to display CCS info. Refer to the charts below using line Field 2 and 4 data.<br>		Diesel Engines often use Measuring Block group 006 to display CCS info. Refer to the charts below using line Field 2 and 4 data.<br>


Line 127:		Line 127:

	'''Notes:'''		'''Notes:'''
			* Some of the newer Engine Control Modules may use the UDS/ODX/ASAM protocols. Those modules do not support conventional Measuring Block Groups. [http://www.ross-tech.com/vcds/tour/adv-meas-blocks.html Advanced Measuring Values] will be used instead and you will check the boxes for CCS (or similar) to locate and view the readings.<br>
			* When additional information is available in VCDS the binary values will appear in a balloon while connected to the vehicle. If there is a discrepancy with the details in the charts above, use the engine specific data in VCDS. <br>
	*On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.		*On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.
	** See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>		** See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>
	* When additional information is available in VCDS the binary values will appear in a balloon while connected to the vehicle. If there is a discrepancy with the details in the charts above, use the engine specific data in VCDS. <br>

Dana at 13:36, 11 April 2011

2011-04-11T13:36:03Z

← Older revision		Revision as of 13:36, 11 April 2011
Line 72:		Line 72:
	=== Gasoline Engines ===		=== Gasoline Engines ===

	Gasoline Engines often use Measuring Block 066 to display CCS info. ~~Please refer~~ to the charts below using line ~~'''A'''~~.<br>		Gasoline Engines often use Measuring Block 066 to display CCS info. Refer to the charts below using line Field 2 and 4 data.<br>


	=== Diesel Engines ===		=== Diesel Engines ===

	Diesel Engines often use Measuring Block 006 to display CCS info. ~~Please refer~~ to the charts below using line ~~'''B''':~~<br>		Diesel Engines often use Measuring Block 006 to display CCS info. Refer to the charts below using line Field 2 and 4 data.<br>


	'''~~A)''' '''Gasoline Engines''' Measuring Block Group '''066, Field 2''' Data<br>~~		'''Field 2''' Data<br>
	~~'''B)''' '''Diesel Engines''' Measuring Block Group '''006,~~ Field 2''' Data<br>
	{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"		{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"
	\|-		\|-
Line 104:		Line 102:


	'''~~A)''' '''Gasoline Engines''' Measuring Block Group '''066, Field 4''' Data<br>~~		'''Field 4''' Data<br>
	~~'''B)''' '''Diesel Engines''' Measuring Block Group '''006,~~ Field 4''' Data<br>

	{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"		{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"
	\|-		\|-
Line 130:		Line 126:


	'''~~Note~~:''' On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.		'''Notes:'''
	* See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>		*On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.
			** See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>
			* When additional information is available in VCDS the binary values will appear in a balloon while connected to the vehicle. If there is a discrepancy with the details in the charts above, use the engine specific data in VCDS. <br>

Dana at 21:21, 7 April 2011

2011-04-07T21:21:09Z

← Older revision		Revision as of 21:21, 7 April 2011
Line 5:		Line 5:
	=== DBW (Drive-by-Wire) ===		=== DBW (Drive-by-Wire) ===

	The CCS (Cruise Control System) on DBW (Drive-by-Wire) throttle systems ~~may be activated in~~ the Engine ~~control module in two possible ways:~~		The CCS (Cruise Control System) activation in the DBW (Drive-by-Wire) throttle systems will vary depending on the Engine Control Module.

	'''1)''' Control modules using '''Short Coding''' often use a Login code and the letter "G" is shown in the component field when activated.		'''1)''' Control modules using '''Short Coding''' often use a Login code and the letter "'''G'''" is shown in the component field when activated.

	Address 01: Engine Labels: 06A-906-032-AWP.lbl		Address 01: Engine Labels: 06A-906-032-AWP.lbl
Line 49:		Line 49:


	'''Note:''' Long Coded modules do Not have the letter G in the component field. If you wanted to see if CCS is enabled, use the Long Coding Helper and see if the box is checked.<br>		'''Note:'''
			* You may have to cycle the key off and back on before the CCS is activated and the new coding takes effect.<br>
			* The [[Throttle Body Alignment (TBA)]] may need to be completed before CCS operates.
			* Long Coded modules do Not have the letter G in the component field. If you wanted to see if CCS is enabled, use the Long Coding Helper and see if the box is checked.<br>


Line 69:		Line 72:
	=== Gasoline Engines ===		=== Gasoline Engines ===

	Gasoline Engines often use Measuring Block 066 to display CCS info. Please refer to ~~these~~ charts:<br>		Gasoline Engines often use Measuring Block 066 to display CCS info. Please refer to the charts below using line '''A'''.<br>


			=== Diesel Engines ===

			Diesel Engines often use Measuring Block 006 to display CCS info. Please refer to the charts below using line '''B''':<br>

	'''Measuring Block Group 066, Field 2 Data'''
			'''A)''' '''Gasoline Engines''' Measuring Block Group '''066, Field 2''' Data<br>
			'''B)''' '''Diesel Engines''' Measuring Block Group '''006, Field 2''' Data<br>
	{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"		{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"
	\|-		\|-
Line 85:		Line 95:
	\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| N/A \|\| style="background:white" \| N/A		\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| N/A \|\| style="background:white" \| N/A
	\|-		\|-
	\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| ~~N/A~~ \|\| style="background:lightblue" \| ~~N/A~~		\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = CCS Switched Off TDI only * \|\| style="background:lightblue" \| 1 = CCS Switched On TDI only *
	\|-		\|-
	\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| 0 = Accel. pedal overide \|\| style="background:white" \|1 = CCS Operating		\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| 0 = Accel. pedal overide \|\| style="background:white" \|1 = CCS Operating
Line 93:		Line 103:


	'''Measuring Block Group 066, Field 4 Data'''
			'''A)''' '''Gasoline Engines''' Measuring Block Group '''066, Field 4''' Data<br>
			'''B)''' '''Diesel Engines''' Measuring Block Group '''006, Field 4''' Data<br>

	{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"		{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"
Line 116:		Line 128:



	~~=== Diesel Engines ===~~

	~~Diesel Engines often use Measuring Block 006 to display CCS info. Please refer to these charts:<br>~~


	Note: On vehicles with additional equipment, the [16] - Steering Wheel module may display additional signals. See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>		'''Note:''' On vehicles with additional equipment, the '''[16] - Steering Wheel Electronics''' module may display additional signals.
			* See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>

Dana at 21:54, 4 April 2011

2011-04-04T21:54:09Z

← Older revision		Revision as of 21:54, 4 April 2011
Line 3:		Line 3:
	== Cruise Control Activation ==		== Cruise Control Activation ==

	=== DBW (Drive By Wire) ===		=== DBW (Drive-by-Wire) ===

	The CCS (Cruise Control System) on DBW (Drive By Wire) throttle systems may be activated in the Engine control module in two possible ways:		The CCS (Cruise Control System) on DBW (Drive-by-Wire) throttle systems may be activated in the Engine control module in two possible ways:

	'''1)''' Control modules using '''Short Coding''' often use a Login code and the letter "G" is shown in the component field when activated.		'''1)''' Control modules using '''Short Coding''' often use a Login code and the letter "G" is shown in the component field when activated.
Line 55:		Line 55:


	=== DBC (Drive By Cable) ===		=== DBC (Drive-By-Cable) ===

	The CCS (Cruise Control System) on DBC (Drive By Cable) throttle systems may or may Not be controlled by the Engine Control Module. Refer to the factory repair manual for additional details on these older systems.<br>		The CCS (Cruise Control System) on DBC (Drive By Cable) throttle systems may or may Not be controlled by the Engine Control Module. Refer to the factory repair manual for additional details on these older systems.<br>
Line 75:		Line 75:
	\|-		\|-
	\|-		\|-
	\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''1''' \|\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''1''' \|\| style="background:lightblue" \| '''1''' \|\| style="background:white" \| '''1''' \|\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''1''' \|\| style="background:white" \| 0 = Brake Not Depressed \|\| style="background:white" \|1 = Brake depressed (brake light switch)		\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''0''' \|\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''0''' \|\| style="background:lightblue" \| '''1''' \|\| style="background:white" \| '''0''' \|\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''0''' \|\| style="background:white" \| 0 = Brake Not Depressed \|\| style="background:white" \|1 = Brake depressed (brake light switch)
	\|-		\|-
	\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = Brake Not Depressed \|\| style="background:lightblue" \|1 = Brake depressed (brake pedal switch)		\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = Brake Not Depressed \|\| style="background:lightblue" \|1 = Brake depressed (brake pedal switch)
Line 91:		Line 91:
	\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = Normal CCS \|\| style="background:lightblue" \|1 = Accel. pedal overide		\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = Normal CCS \|\| style="background:lightblue" \|1 = Accel. pedal overide
	\|}		\|}


			'''Measuring Block Group 066, Field 4 Data'''

			{\| class="wikitable" style="background:lightgray; text-align:center; width:85%" "border="1"
			\|-
			\|-
			\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''0''' \|\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''0''' \|\| style="background:lightblue" \| '''0''' \|\| style="background:white" \| '''0''' \|\| style="background:lightblue" \| '''1''' \|\| style="background:white" \| '''1''' \|\| style="background:white" \| 0 = CCS Switched Off \|\| style="background:white" \|1 = CCS Switched On
			\|-
			\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = Cancel/Off Activated \|\| style="background:lightblue" \|1 = CCS Switched On
			\|-
			\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| 0 = SET/ Decel. Not Pressed \|\| style="background:white" \|1 = SET/ Decel. Button Pressed
			\|-
			\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| 0 = Resume/Accel Not Pressed \|\| style="background:lightblue" \|1 = Resume/Accel Button Pressed
			\|-
			\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| N/A \|\| style="background:white" \| N/A
			\|-
			\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| N/A \|\| style="background:lightblue" \| N/A
			\|-
			\| style="background:lightblue" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| \|\| style="background:white" \| N/A \|\| style="background:white" \| N/A
			\|-
			\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\| style="background:lightblue" \| \|\|style="background:lightblue" \| N/A \|\| style="background:lightblue" \|N/A
			\|}



	=== Diesel Engines ===		=== Diesel Engines ===

Dana at 14:31, 4 April 2011

2011-04-04T14:31:55Z

← Older revision		Revision as of 14:31, 4 April 2011
Line 20:		Line 20:
	'''[Select]'''<br>		'''[Select]'''<br>
	'''[01 - Engine]'''<br>		'''[01 - Engine]'''<br>
	'''[Login - 11]'''<br>		'''[Login - 11]''' or if that function is not available then use '''[Coding - 11]''' instead <br>
	Enter 11463 to activate cruise control<br>		Enter 11463 to activate cruise control<br>
	'''[Do It!]'''<br>		'''[Do It!]'''<br>

	~~Note: You may have to cycle the key off and back on before the CCS is activated and the letter "G" is shown in the component field.<br>~~

			'''Notes:'''
			* You may have to cycle the key off and back on before the CCS is activated and the letter "G" is shown in the component field.<br>
			* The [[Throttle Body Alignment (TBA)]] may need to be completed before CCS operates.
			* If CCS needs to be de-activated use the Login of: 16167

	'''2)''' Control modules using '''Long Coding''' are activated in the Coding. Due to different Control Modules Vehicle Equipment, the actual Coding Table is not shown here but will automatically be used by the [http://www.ross-tech.com/vcds/tour/recode_screen.html#helper Long Coding Helper ] with VCDS.<br>
			'''2)''' Control modules using '''Long Coding''' are activated in the Coding. Due to different Control Modules Vehicle Equipment, the actual Coding Table is not shown here but will automatically be used by the [http://www.ross-tech.com/vcds/tour/recode_screen.html#helper Long Coding Helper] with VCDS.<br>

	Address 01: Engine (CBF) Labels: 06J-907-115-CBF.clb		Address 01: Engine (CBF) Labels: 06J-907-115-CBF.clb
Line 43:		Line 47:
	Check the box for CCS and Exit<br>		Check the box for CCS and Exit<br>
	'''[Do It!]'''<br>		'''[Do It!]'''<br>


			'''Note:''' Long Coded modules do Not have the letter G in the component field. If you wanted to see if CCS is enabled, use the Long Coding Helper and see if the box is checked.<br>


Line 90:		Line 97:


	Note: On vehicles with additional equipment, the [16] - Steering Wheel module may display additional signals. See the [[Cruise Control Retrofitting ]] and [[Diagnostic Procedures]] for the specific platform.<br>		Note: On vehicles with additional equipment, the [16] - Steering Wheel module may display additional signals. See the [[Retrofitting#Cruise Control Retrofitting \| Cruise Control Retrofitting]] and [[Diagnostic Procedures]] for the specific platform.<br>