VW Touareg (7P) Steering Wheel Electronics - Revision history

Dana at 15:50, 14 July 2020

2020-07-14T15:50:52Z

← Older revision		Revision as of 15:50, 14 July 2020
Line 2:		Line 2:
	== Coding ==		== Coding ==

	Coding for this Control Module is normally done via '''Software Version Management (SVM)'''. If the old Control Module is still accessible read/copy it's Coding to the new Module. If ~~this~~ is not ~~possible each coding inquiry has~~ to ~~be configured per~~ vehicle ~~based on~~ the ~~complete~~ [http://www.ross-tech.com/vcds/tour/~~autoscan~~.html ~~Auto-Scan~~] ~~and vehicle repair history~~. '''Registered Customers''' can [mailto:Support@Ross-Tech.com email] ~~directly with each request~~.		Coding for this Control Module is normally done via '''Software Version Management (SVM)'''.<br>
			.<br>
			If the old Control Module is still accessible read/copy it's Coding to the new Module.<br>
			If a complete [https://www.ross-tech.com/vcds/tour/autoscan.php Auto-Scan] containing the original Coding of the Control Module is not available Coding information is available while connected to the vehicle with VCDS using the '''[http://www.ross-tech.com/vcds/tour/recode_screen.html Long Coding Helper]'''. If you are unable to build the coding using the Long Coding Helper '''Registered Customers''' can [mailto:Support@Ross-Tech.com email]the complete [http://www.ross-tech.com/vcds/tour/autoscan.html Auto-Scan] and vehicle repair history.

Dana: /* Steering Angle Sensor (G85) Calibration */

2018-07-20T16:43:57Z

Steering Angle Sensor (G85) Calibration

← Older revision		Revision as of 16:43, 20 July 2018
Line 17:		Line 17:
	'''[16 - Steering Wheel]'''<br>		'''[16 - Steering Wheel]'''<br>

	Turn steering wheel at least 30 ° left or right and back straight ahead (Tolerance: ±5.0 °).<br>		Turn steering wheel at least 30 ° left or right and back straight ahead (Tolerance: ±0.5 °).<br>

	'''[Security Access - 16]'''<br>		'''[Security Access - 16]'''<br>
Line 34:		Line 34:
	Group 033 Field 3 (Steering Angle Sensor -G85-)<br>		Group 033 Field 3 (Steering Angle Sensor -G85-)<br>
	Specification: 0.0 °<br>		Specification: 0.0 °<br>
	Tolerance (when straight): ±1.5 °<br>		Tolerance (when straight): ±0.5 °<br>
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>

Dana at 16:20, 2 May 2013

2013-05-02T16:20:45Z

← Older revision		Revision as of 16:20, 2 May 2013
Line 2:		Line 2:
	== Coding ==		== Coding ==

	~~'''~~Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it's Coding to the new Module. ~~In case~~ this is not possible ~~please~~ [http://www.ross-tech.com/~~contact~~.html ~~contact us directly] and we will assist you with the Coding Process.~~		Coding for this Control Module is normally done via '''Software Version Management (SVM)'''. If the old Control Module is still accessible read/copy it's Coding to the new Module. If this is not possible each coding inquiry has to be configured per vehicle based on the complete [http://www.ross-tech.com/vcds/tour/autoscan.html Auto-Scan] and vehicle repair history. '''Registered Customers''' can [mailto:Support@Ross-Tech.com email] directly with each request.

	~~''Every inquiry on this topic has to include a full~~ Auto-Scan ~~as well as which parts have been replaced~~ and ~~why, also make sure the Auto-Scan includes the complete VIN of the~~ vehicle ~~in question~~.''~~<br> <br>~~

Peter at 14:45, 19 September 2012

2012-09-19T14:45:56Z

← Older revision		Revision as of 14:45, 19 September 2012
Line 6:		Line 6:
	''Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.''<br> <br>		''Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.''<br> <br>

	* Rear Wiper (Avant/Wagon) installed
	* Board Computer (Driver Information System/DIS) installed
	* Cruise Control System (CCS) installed
	* Adaptive Cruise Control (ACC) installed
	* Multi-Function Steering Wheel (MFL) installed
	* Tiptronic installed (ONLY with Multi-Function Steering Wheel)
	* Lane Assistant (Vibration Motor) installed

Peter: Created page with "FORCETOC == Coding == '''Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it..."

2012-09-19T14:45:38Z

Created page with "__FORCETOC__ == Coding == '''Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it..."

New page

__FORCETOC__
== Coding ==

'''Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it's Coding to the new Module. In case this is not possible please [http://www.ross-tech.com/contact.html contact us directly] and we will assist you with the Coding Process.

''Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.'' 

* Rear Wiper (Avant/Wagon) installed
* Board Computer (Driver Information System/DIS) installed
* Cruise Control System (CCS) installed
* Adaptive Cruise Control (ACC) installed
* Multi-Function Steering Wheel (MFL) installed
* Tiptronic installed (ONLY with Multi-Function Steering Wheel)
* Lane Assistant (Vibration Motor) installed

== Security Access ==
* 40168 = Basic Setting Enabling

== Basic Setting ==

=== Steering Angle Sensor (G85) Calibration ===

'''[Select]''' 
'''[16 - Steering Wheel]''' 

Turn steering wheel at least 30 ° left or right and back straight ahead (Tolerance: ±5.0 °). 

'''[Security Access - 16]''' 
Enter 40168 
'''[Do It!]''' 

'''[Basic Settings - 04]''' 
Group 001 
'''[Go!]''' 
Activate the Basic Setting. 
'''[ON/OFF/Next]''' 
After a successful basic setting, field 3 should say "OK". 
'''[Done, Go Back]''' 

'''[Meas. Blocks - 08]''' 
Group 033 Field 3 (Steering Angle Sensor -G85-) 
Specification: 0.0 ° 
Tolerance (when straight): ±1.5 ° 
'''[Done, Go Back]''' 

Notes:
* To confirm the status of the G85 calibration see MVB group 032.
* If the basic setting group results in an error message verify the live G85 reading is ±1.5 °. Readings such as 359° would indicate the slip ring is mechanically out one full turn.
* The slip ring is the 16-Steering Wheel Electronics module. If the vehicle deployed Airbag(s) and the slip ring was replaced make sure the module is [http://www.ross-tech.com/vcds/tour/recode_screen.html#long long coded] using VCDS.

VW Touareg (7P) Steering Wheel Electronics - Revision history

Dana at 15:50, 14 July 2020

Dana: /* Steering Angle Sensor (G85) Calibration */

Dana at 16:20, 2 May 2013

Peter at 14:45, 19 September 2012

Peter: Created page with "__FORCETOC__ == Coding == '''Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it..."

Peter: Created page with "FORCETOC == Coding == '''Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it..."