VW Touareg (7P) Trunk Electronics - Revision history

Dana at 21:39, 20 March 2023

2023-03-20T21:39:36Z

← Older revision		Revision as of 21:39, 20 March 2023
Line 38:		Line 38:
	The rear lid Basic Settings will now begin		The rear lid Basic Settings will now begin
	* If the the rear lid begins to open let it continue.<br>		* If the the rear lid begins to open let it continue.<br>
	* If the ~~read~~ lid does NOT begin to open, operate the switch on the Driver's door -or- the switch on the outside of the lid.<br>		* If the rear lid does NOT begin to open, operate the switch on the Driver's door -or- the switch on the outside of the lid.<br>
	**"Unknown" may be shown on-screen during the procedure.		**"Unknown" may be shown on-screen during the procedure.
	*When the rear lid has stopped opening, close the rear lid using Driver's door switch -or- the E406 switch on the inside lid trim.<br>		*When the rear lid has stopped opening, close the rear lid using Driver's door switch -or- the E406 switch on the inside lid trim.<br>

Dana at 16:02, 12 July 2018

2018-07-12T16:02:09Z

← Older revision		Revision as of 16:02, 12 July 2018
Line 1:		Line 1:
	__FORCETOC__		__FORCETOC__
	This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component: HDSG-Modul.<br>		This page applies to vehicles such as the Audi A7 (4G), Audi A8 (4H), Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component: '''HDSG-Modul'''.<br>


	This can be identified by evaluating the data in the Auto-Scan: <br>		This can be identified by evaluating the data in the Auto-Scan: <br>

Dana at 13:55, 12 July 2018

2018-07-12T13:55:42Z

← Older revision		Revision as of 13:55, 12 July 2018
Line 35:		Line 35:
	Select '''Adapt flap opening angle''' from the drop-down menu.<br>		Select '''Adapt flap opening angle''' from the drop-down menu.<br>
	'''[Go!]'''<br>		'''[Go!]'''<br>
	The rear lid Basic Settings will now begin ~~and~~ the rear lid ~~will~~ open.<br>		The rear lid Basic Settings will now begin
	'~~'Finished Correctly (~~or ~~similar) should be displayed~~.''<br>		* If the the rear lid begins to open let it continue.<br>
	*When the rear lid has stopped, close the rear lid using the E406 switch.<br>		* If the read lid does NOT begin to open, operate the switch on the Driver's door -or- the switch on the outside of the lid.<br>
			**"Unknown" may be shown on-screen during the procedure.
			*When the rear lid has stopped opening, close the rear lid using Driver's door switch -or- the E406 switch on the inside lid trim.<br>
			''Finished Correctly should be displayed after the procedure completes.''<br>
	'''[Stop]'''<br>		'''[Stop]'''<br>
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>

Dana at 15:56, 12 May 2016

2016-05-12T15:56:46Z

← Older revision		Revision as of 15:56, 12 May 2016
Line 24:		Line 24:
	* No rear lid obstructions or damage to the vehicle		* No rear lid obstructions or damage to the vehicle
	* Park assist functions correctly, no errors (If equipped)		* Park assist functions correctly, no errors (If equipped)
	* DTC B2010 - No Basic Setting stored		* DTC [[B2010]] - No Basic Setting stored
	* Battery voltage at least 12.0V		* Battery voltage at least 12.0V
	* Vehicle is on a flat level surface		* Vehicle is on a flat level surface

Dana at 22:03, 24 March 2016

2016-03-24T22:03:37Z

← Older revision		Revision as of 22:03, 24 March 2016
Line 1:		Line 1:
	__FORCETOC__		__FORCETOC__
	This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg		This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component: HDSG-Modul.<br>

	~~with (7P) with Address-6D: Trunk Elect. Component: HDSG-Modul.~~ This can be identified by evaluating the data		This can be identified by evaluating the data in the Auto-Scan: <br>

	in the Auto-Scan:

	Address 6D: Trunk Elect. (----) Labels: 7N0-959-107.clb		Address 6D: Trunk Elect. (----) Labels: 7N0-959-107.clb

Dana at 16:52, 8 March 2016

2016-03-08T16:52:35Z

← Older revision		Revision as of 16:52, 8 March 2016
Line 21:		Line 21:
	== Basic Setting ==		== Basic Setting ==
	=== Rear Lid relearn ===		=== Rear Lid relearn ===
	~~Opening angle of tailgate~~		'''<u>Prerequisites:</u>'''<br>
			* Rear Lid closed
			* Transport mode NOT active
			* No rear lid obstructions or damage to the vehicle
			* Park assist functions correctly, no errors (If equipped)
			* DTC B2010 - No Basic Setting stored
			* Battery voltage at least 12.0V
			* Vehicle is on a flat level surface


	~~'''<u>Prerequisites:</u>'''<br>~~
	* Rear Lid closed.
	* Transport mode NOT active.

	'''[Select]'''<br>		'''[Select]'''<br>

Dana at 15:38, 8 March 2016

2016-03-08T15:38:23Z

← Older revision		Revision as of 15:38, 8 March 2016
Line 21:		Line 21:
	== Basic Setting ==		== Basic Setting ==
	=== Rear Lid relearn ===		=== Rear Lid relearn ===
			Opening angle of tailgate

			'''<u>Prerequisites:</u>'''<br>
			* Rear Lid closed.
			* Transport mode NOT active.

	'''[Select]'''<br>		'''[Select]'''<br>
	''' [6D-Trunk Elect.]		''' [6D-Trunk Elect.]'''<br>

	~~''' [Security Access - 16]<br>~~
	~~Enter 59107<br> or **** 12345?? <br>~~
	~~'''[Do it!~~]'''<br>
	'''[Basic Settings - 04]'''<br>		'''[Basic Settings - 04]'''<br>
	Select '''Adapt flap opening angle''' from the drop-down menu.<br>		Select '''Adapt flap opening angle''' from the drop-down menu.<br>
	'''[Go!]'''<br>		'''[Go!]'''<br>
	The rear lid Basic Settings will now begin and the rear lid will open.<br>		The rear lid Basic Settings will now begin and the rear lid will open.<br>
	*When the rear lid has stopped, close the rear lid.<br>
	''Finished Correctly (or similar) should be displayed.''<br>		''Finished Correctly (or similar) should be displayed.''<br>
			*When the rear lid has stopped, close the rear lid using the E406 switch.<br>
	'''[Stop]'''<br>		'''[Stop]'''<br>
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>

Dana: Created page with "FORCETOC This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component..."

2016-03-07T22:32:35Z

Created page with "__FORCETOC__ This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component..."

New page

__FORCETOC__
This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg

with (7P) with Address-6D: Trunk Elect. Component: HDSG-Modul. This can be identified by evaluating the data

in the Auto-Scan:

Address 6D: Trunk Elect. (----) Labels: 7N0-959-107.clb
Part No SW: 7P6 959 107 C HW: 7P6 959 107
Component: '''HDSG-Modul'''
ASAM Dataset: EV_HeckkTouar 202142

== Security Access ==
* Security Access codes will appear when connected to the control module with VCDS.

== Coding ==

* Coding information is found using the '''[http://www.ross-tech.com/vcds/tour/recode_screen.html#long Long Coding Helper]''' while connected to the vehicle with VCDS.
* When replacing this module save the original coding and transfer it to the new module. 

== Basic Setting ==
=== Rear Lid relearn ===

'''[Select]''' 
''' [6D-Trunk Elect.]

''' [Security Access - 16] 
Enter 59107 or **** 12345?? 
'''[Do it!]''' 
'''[Basic Settings - 04]''' 
Select '''Adapt flap opening angle''' from the drop-down menu. 
'''[Go!]''' 
The rear lid Basic Settings will now begin and the rear lid will open. 
*When the rear lid has stopped, close the rear lid. 
''Finished Correctly (or similar) should be displayed.'' 
'''[Stop]''' 
'''[Done, Go Back]''' 
*Check for fault codes, clear if needed.

'''[Close Controller, Go Back - 06]''' 
* Check for proper operation
* Re-check for faults

Internal use reference: ST?ID=66024