VW Golf (1K) Comfort System: Difference between revisions
          From Ross-Tech Wiki
          
          
      
      
      
      Table Of Contents
RtWiKiSyS0p (talk | contribs) No edit summary  | 
				RtWiKiSyS0p (talk | contribs) mNo edit summary  | 
				||
| Line 30: | Line 30: | ||
'''[Test]'''<br>  | '''[Test]'''<br>  | ||
'''[Save]'''<br><br>  | '''[Save]'''<br><br>  | ||
''<u>Note:</u> The time for matching remotes after saving the new value should not exceed 30 seconds.''  | ''<u>Note:</u> The time for matching remotes after saving the new value should not exceed 30 seconds. You can add a maximum of 4 remotes.''<br>  | ||
* Press the ''unlock'' button on each remote control you want to add, the blinkers will light up to confirm the adaptation process of each remote.  | * Press the ''unlock'' button on each remote control you want to add, the blinkers will light up to confirm the adaptation process of each remote.  | ||
Revision as of 12:49, 4 April 2006
Coding
Adaptation
Channel 000: Remote Control Clearing
[Select]
[46 - Comfort System]
[Adaptation - 10]
Channel 000.
[Read]
To clear all matched remote controls press save.
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]
Channel 001: Remote Control Matching
[Select]
[46 - Comfort System]
[Adaptation - 10]
Channel 001.
[Read]
Note: The value does NOT show the actual number of adapted remotes.
- 0 = All memory positions occupied, matching of additionals keys not possible, clear memory positons first.
 - 1 = Matching of additional remotes possible.
 
- Start matching new/additional remotes with entering "1" as new value.
 
[Test]
[Save]
Note: The time for matching remotes after saving the new value should not exceed 30 seconds. You can add a maximum of 4 remotes.
- Press the unlock button on each remote control you want to add, the blinkers will light up to confirm the adaptation process of each remote.
 
[Done, Go Back]
[Close Controller, Go Back - 06]
Special Procedures
Remote Control Synchronisation
- If locked, open the car using the drivers door lock.
 - Press the remote control unlock button.
 - Put the key in the ignition lock and switch on ignition.
 - Switch off ignition and pull the key out of the ignition lock.
 - Press the remote control lock or unlock button.
 
The synchronisation is now finished.
No categories.