17119/P0735/001845: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
17119/P0735/001845 - Gear 5: Incorrect Ratio
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
RtWiKiSyS0p (talk | contribs) No edit summary |
RtWiKiSyS0p (talk | contribs) mNo edit summary |
||
| Line 16: | Line 16: | ||
* Check Engine Values for Plausibility, especially Torque related ones. | * Check Engine Values for Plausibility, especially Torque related ones. | ||
==== Special Notes ==== | |||
* The gear monitoring of the transmission control module checks the gear ratio by comparing transmission input and output speed in regard of the currently selected gear. This fault code is being set when recognizing an implausible transmission ratio. | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 22:35, 15 December 2006
17119/P0735/001845 - Gear 5: Incorrect Ratio
Possible Symptoms
- Clutch Slipping
- Reduced Power Output
Possible Causes
- Gear related Clutch slipping/faulty
- Gear related Solenoid Valve dirty/faulty
- Overloaded Clutch due to continuous high Torque or Tuning
Possible Solutions
- Check Engine Values for Plausibility, especially Torque related ones.
Special Notes
- The gear monitoring of the transmission control module checks the gear ratio by comparing transmission input and output speed in regard of the currently selected gear. This fault code is being set when recognizing an implausible transmission ratio.