01542: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
01542 - Yaw Rate Sensor (G202)
-
1.1.1
01542 - Yaw Rate Sensor (G202): Electrical Fault in Circuit
- 1.1.1.2 Possible Symptoms
- 1.1.2.2 Possible Causes
- 1.1.3.2 Possible Solutions
-
1.1.1
01542 - Yaw Rate Sensor (G202): Electrical Fault in Circuit
RtWiKiSyS0p (talk | contribs) No edit summary |
RtWiKiSyS0p (talk | contribs) mNo edit summary |
||
| Line 20: | Line 20: | ||
=== 01542 - Yaw Rate Sensor (G202): No or Incorrect Basic Setting / Adaptation === | === 01542 - Yaw Rate Sensor (G202): No or Incorrect Basic Setting / Adaptation === | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
* Yaw Rate Sensor (G202) Basic Setting lost | * Yaw Rate Sensor (G202) Basic Setting lost/not performed | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
Revision as of 14:12, 6 March 2008
01542 - Yaw Rate Sensor (G202)
01542 - Yaw Rate Sensor (G202): Electrical Fault in Circuit
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Yaw Rate Sensor (G202) faulty
- ESP-Sensor Unit (G419) faulty
Possible Solutions
- Check Yaw Rate Sensor (G202)
- Check ESP-Sensor Unit (G419)
01542 - Yaw Rate Sensor (G202): No or Incorrect Basic Setting / Adaptation
Possible Causes
- Yaw Rate Sensor (G202) Basic Setting lost/not performed
Possible Solutions
- Perform Yaw Rate Sensor (G202) Basic Setting
- See Vehicle specific Diagnostic Procedures for Details