00513: Difference between revisions

Latest revision as of 23:06, 22 March 2008

Most 1995 and earlier Bosch ECU's will show you a DTC "00513 - Engine Speed Sensor (G28): No Signal" if you scan them when the engine is not running. This fault code goes away by itself once you start the engine. If this sensor were truly defective, the engine would not run at all! Please ignore this code.

Revision as of 11:48, 8 September 2006 view source RtWiKiSyS0p (talk \| contribs) Bureaucrats, Administrators 3,644 edits No edit summary		Latest revision as of 23:06, 22 March 2008 view source RtWiKiSyS0p (talk \| contribs) Bureaucrats, Administrators 3,644 edits mNo edit summary
Line 20:		Line 20:
	==== Special Notes ====		==== Special Notes ====

	* Most 1995 and earlier Bosch ECU's will show you a DTC 00513 - Engine Speed Sensor (G28) if you scan them when the engine is not running. This fault code goes away by itself once you start the engine. If this sensor were truly defective, the engine would not run at all! Please ignore this code.		* Most 1995 and earlier Bosch ECU's will show you a DTC "00513 - Engine Speed Sensor (G28): No Signal" if you scan them when the engine is not running. This fault code goes away by itself once you start the engine. If this sensor were truly defective, the engine would not run at all! Please ignore this code.