18447/P2015/008213: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
16347/P2015 - Intake Manifold Flap Position Sensor (Bank 1)
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
Created page with "__FORCETOC__ == 16347/P2015 - Intake Manifold Flap Position Sensor (Bank 1) == ==== Possible Symptoms ==== * MIL on ==== Possible Causes ==== * Intake manifold "tumble f..." |
(No difference)
|
Revision as of 16:36, 29 May 2012
16347/P2015 - Intake Manifold Flap Position Sensor (Bank 1)
Possible Symptoms
- MIL on
Possible Causes
- Intake manifold "tumble flaps" sticking
- "bad" intake manifold
- Failed V157
- ECM issue
- Wiring harness issue to V157
Possible Solutions
- Test wiring, see factory repair manual
Special Notes
- Verify you have the latest version of the V157 unit and ECM firmware.
- In some cases the issue is being resolved by replacing the whole intake manifold.
- The V157 and sensor G336 are part of the same unit