721152: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
721152 - Brake pad replacement mode active
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
Created page with "== 721152 - Brake pad replacement mode active == ==== Possible Symptoms ==== * EPB light on ==== Possible Causes ==== * Parking Brakes in service mode for rear brake job *..." |
(No difference)
|
Latest revision as of 16:21, 9 May 2014
721152 - Brake pad replacement mode active
Possible Symptoms
- EPB light on
Possible Causes
- Parking Brakes in service mode for rear brake job
- Basic Settings "Start lining change mode"
Possible Solutions
- Complete rear brake job, then test parking brake operation
Special Notes
- On UDS EPB modules, this code is normal while doing rear brake service. In most cases, you can not clear this code out with a scan tool, it should clear out on its own after you set and release the parking brakes.