VW Jetta (AJ/16) Manual Heating/Air Conditioning: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
- 1. Coding
-
2.
Basic Setting
- 2.1.2 Special Notes
No edit summary |
|||
| Line 9: | Line 9: | ||
* The Manual Heating/Air Conditioning controller does not require a scan tool to perform the Basic Settings for the Activation of the A/C Compressor, please use the following instructions below. | * The Manual Heating/Air Conditioning controller does not require a scan tool to perform the Basic Settings for the Activation of the A/C Compressor, please use the following instructions below. | ||
**Position the blower switch to the first or second | **Position the blower switch to the first or second speed | ||
**Position the air distribution control to 'Vent' | **Position the air distribution control to 'Vent' | ||
**Position the interior temperature control to 'Cold', turn to the stop | **Position the interior temperature control to 'Cold', turn to the stop | ||
Latest revision as of 19:32, 2 January 2015
Coding
This module does not support coding!
Basic Setting
- The Manual Heating/Air Conditioning controller does not require a scan tool to perform the Basic Settings for the Activation of the A/C Compressor, please use the following instructions below.
- Position the blower switch to the first or second speed
- Position the air distribution control to 'Vent'
- Position the interior temperature control to 'Cold', turn to the stop
- Start the Vehicle's engine while in Park/Neutral
- Simultaneously press/ hold the AC and Defrost buttons until the AC and recirculation buttons illuminate
- Cycle the ignition and check for fault codes in the 08-Auto HVAC and proper HVAC system operation.
Special Notes
- This procedure above, must be competed when:
- The J301-Air conditioning system control unit is replaced.
- The fault code 00898-005 will not clear.
No categories.