17035/P0651/001617: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
Created page with "__FORCETOC__ 17035/P0651/001617 - Sensor Reference Voltage "B" Circuit/Open ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) active * Poor engine performance ..." |
(No difference)
|
Revision as of 13:21, 9 August 2017
17035/P0651/001617 - Sensor Reference Voltage "B" Circuit/Open
Possible Symptoms
- Malfunction Indicator Light (MIL) active
- Poor engine performance
Possible Causes
- Faulty wiring on Sensor Reference Voltage "B" Circuit
- Faulty sensor or component on Sensor Reference Voltage "B" Circuit
- Faulty ECM
Possible Solutions
- Check wiring on Sensor Reference Voltage "B" Circuit
- Check sensors and components on the Sensor Reference Voltage "B" Circuit
- Check wiring at the ECM with all components removed from the Circuit to verify the reference voltage is present.
- If the ECM is NOT producing the needed voltage and all powers/grounds going to it are OK, replace ECM.
Special Notes
- When found in any Golf (1K/5K/AJ) based VW model with a 2nd Gen (2008.5 - 2014 model year) timing chain driven 2.0TSI Gasoline engine, the Sensor Reference Voltage "B" Circuit should be found on terminal T60/29 which powers G40, G247 and G609 (when installed).