Bentley Continental (3W) Seat Mem Drvr: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
- 1. Coding
-
2.
Adaptation
- 2.1.2 Channel 00: Reset
-
3.
Basic Setting
- 3.1.4 Seat Adjustment
Created page with "__FORCETOC__ == Coding == *'''xxxxxx?: Seat Massage function **1 = without Seat Massage **2 = with Seat Massage == Adaptation == === Channel 00: Reset === * Save channel [0..." |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 18: | Line 18: | ||
'''[36-Seat Mem Drvr]'''<br> | '''[36-Seat Mem Drvr]'''<br> | ||
*Prerequisites: Adapt Chn.[00] Saved to [0] | *Prerequisites: Adapt Chn.[00] Saved to [0] | ||
*WARNING! - Seat will move to end stops when Basic Settings has started | *WARNING! - Seat and steering column will move to end stops when Basic Settings has started | ||
**Make sure Nothing is in or near the Seat | **Make sure Nothing is in or near the Seat | ||
'''[Basic Settings - 04]'''<br> | '''[Basic Settings - 04]'''<br> | ||
Group | Group 001<br> | ||
'''[Go!]'''<br> | '''[Go!]'''<br> Field 1 displays [KD-Int] | ||
* The Seat will begin to move to all the end stops (this may take up to 20 seconds or more). | |||
'''[On/Off/Next]'''<br> | |||
* The Seat and steering column will begin to move to all the end stops (this may take up to 20 seconds or more). | |||
* Continue only once the Seat has stopped moving. | * Continue only once the Seat has stopped moving. | ||
* When completed, fields will now display motor's learned status | |||
* Basic Setting fault codes should be erased | * Basic Setting fault codes should be erased | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
Latest revision as of 19:24, 16 November 2018
Coding
- xxxxxx?: Seat Massage function
- 1 = without Seat Massage
- 2 = with Seat Massage
Adaptation
Channel 00: Reset
- Save channel [00] to [0] - Resets Learned Seat Adaptations.
Basic Setting
Seat Adjustment
[Select]
[36-Seat Mem Drvr]
- Prerequisites: Adapt Chn.[00] Saved to [0]
- WARNING! - Seat and steering column will move to end stops when Basic Settings has started
- Make sure Nothing is in or near the Seat
[Basic Settings - 04]
Group 001
[Go!]
Field 1 displays [KD-Int]
[On/Off/Next]
- The Seat and steering column will begin to move to all the end stops (this may take up to 20 seconds or more).
- Continue only once the Seat has stopped moving.
- When completed, fields will now display motor's learned status
- Basic Setting fault codes should be erased
[Done, Go Back]
[Close Controller, Go Back - 06]
No categories.