C10E2: Difference between revisions

Revision as of 22:15, 29 July 2022

When found with the "Extended UDS fault details" [Steuergerät EPB - H-Brückenfehler] / [EPB Control Module - H-Bridge Error] see post #52 in this thread

When found in the 03-ABS Brake module on MQB (Mk7 chassis) vehicles with an Electro-Mechanical Parking Brake (EPB) see post #8 in this thread

@@ Line 1: / Line 1: @@
 __FORCETOC__
+== C10E2 01 - Control Module for Electronic Parking Brake: Electrical Failure ==
+==== Possible Symptoms ====
+* Flashing LED on Parking Brake Switch
+* Parking Brake warning message in instrument cluster
+* Parking Brake fails to operate
+==== Possible Causes ====
+* Faulty Wiring or Connections
+* Faulty Automatic parking brake Motor
+* Low battery voltage (may cause component damage)
+==== Possible Solutions ====
+* Check/repair electrical wiring or connections
+* Replace faulty Automatic parking brake Motor
+==== Special Notes ====
+* When found with the "Extended UDS fault details" [Steuergerät EPB - H-Brückenfehler] / [EPB Control Module - H-Bridge Error] see [https://forums.ross-tech.com/index.php?threads/30399/ post #52 in this thread]
+[[Category:Fault Codes]]
 == C10E2 54 - Control Module for Electronic Parking Brake: Missing Calibration / Basic Setting ==