C1292/021138: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.1 C1292 - Clutch Actuator for All Wheel Drive
-
1.1.2 C1292 - Clutch Actuator for All Wheel Drive: Missing Calibration / Basic Setting
-
1.1.1.3 Possible Symptoms
-
1.1.2.4 Possible Causes
-
1.1.3.5 Possible Solutions
-
1.1.4.6 Special Notes
-
1.1.1.3 Possible Symptoms
-
1.1.2 C1292 - Clutch Actuator for All Wheel Drive: Missing Calibration / Basic Setting
Created page with "__FORCETOC__ == C1292/021138 - Clutch Actuator for All Wheel Drive: Missing Calibration / Basic Setting == == Possible Symptoms == * MIL (Malfunction Indicator Lamp) ON ==..." |
No edit summary |
||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== C1292 | == C1292 - Clutch Actuator for All Wheel Drive == | ||
=== C1292 - Clutch Actuator for All Wheel Drive: Missing Calibration / Basic Setting === | |||
== Possible Symptoms == | ==== Possible Symptoms ==== | ||
* MIL (Malfunction Indicator Lamp) ON | * MIL (Malfunction Indicator Lamp) ON | ||
== Possible Causes == | ==== Possible Causes ==== | ||
* All Wheel Drive Control Module -J492- replaced | * All Wheel Drive Control Module -J492- replaced | ||
* Components associated with clutch actuator replaced | * Components associated with clutch actuator replaced | ||
* Basic Settings not performed after repairs | * Basic Settings not performed after repairs | ||
== Possible Solutions == | ==== Possible Solutions ==== | ||
* Perform Basic Settings for the All Wheel Drive Control Module -J492- after clearing all other fault codes | * Perform Basic Settings for the All Wheel Drive Control Module -J492- after clearing all other fault codes | ||
== Special Notes == | ==== Special Notes ==== | ||
* Use the following Basic Settings in vehicles with ASAM Dataset: EV_AWDCQUOD31 | * Use the following Basic Settings in vehicles with ASAM Dataset: EV_AWDCQUOD31 | ||
** IDE02906-ENG188617 – Resetting clutch data (Reset Kupplungsdaten) | ** IDE02906-ENG188617 – Resetting clutch data (Reset Kupplungsdaten) | ||
Latest revision as of 18:44, 18 September 2025
C1292 - Clutch Actuator for All Wheel Drive
C1292 - Clutch Actuator for All Wheel Drive: Missing Calibration / Basic Setting
Possible Symptoms
- MIL (Malfunction Indicator Lamp) ON
Possible Causes
- All Wheel Drive Control Module -J492- replaced
- Components associated with clutch actuator replaced
- Basic Settings not performed after repairs
Possible Solutions
- Perform Basic Settings for the All Wheel Drive Control Module -J492- after clearing all other fault codes
Special Notes
- Use the following Basic Settings in vehicles with ASAM Dataset: EV_AWDCQUOD31
- IDE02906-ENG188617 – Resetting clutch data (Reset Kupplungsdaten)
- IDE03198-ENG188614 – Static calibration (Erstkalibrierung)
No categories.