18075/P1667: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
Gerrit Speek (talk | contribs) No edit summary |
Gerrit Speek (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 14: | Line 14: | ||
* Check wiring and Check / Clean all connections | * Check wiring and Check / Clean all connections | ||
* Replace | * Replace the cable-tree to/from all the Valves for Pump Jet | ||
* Replace Valve for Pump Jet (replace them all !) | * Replace Valve for Pump Jet (replace them all !) | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
* For each Valve the ECU checks the Begin of Injection Period (BIP) via a voltage. That voltage is very small (less | * For each Valve the ECU checks the Begin of Injection Period (BIP) via a voltage. That voltage is very small (less than 0.0001A). Each extra resistance in the cable is fatal. So, in case of any doubt, just replace all cables. | ||
than 0.0001A). Each extra resistance in the cable is fatal. So, in case of any doubt, just replace all cables. | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 07:38, 15 June 2006
18075/P1667 - Valve for Pump - Jet: Cylinder 2 (N241): Electrical Malfunction
Possible Symptoms
- Irregular rpm
Possible Causes
- Wiring and/or connections to/from the Valve for Pump Jet
- Valve for Pump Jet
Possible Solutions
- Check wiring and Check / Clean all connections
- Replace the cable-tree to/from all the Valves for Pump Jet
- Replace Valve for Pump Jet (replace them all !)
Special Notes
- For each Valve the ECU checks the Begin of Injection Period (BIP) via a voltage. That voltage is very small (less than 0.0001A). Each extra resistance in the cable is fatal. So, in case of any doubt, just replace all cables.