U102F/053295: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
Created page with "__FORCETOC__ == U102F - Fan Identification Sensor: No Communications== ==== Possible Causes ==== * Wiring, connections concerns or faulty G611-Radiator Identification Sensor..." |
No edit summary |
||
| Line 15: | Line 15: | ||
* The cooling surface of the radiator on some Volkswagen/Audi Group vehicles is coated with a catalyst that helps reduce Ozone, The G611 sensor monitors this function and is part of the federal emissions control of these vehicles which allows the manufacture to receive EPA 'credits'. | * The cooling surface of the radiator on some Volkswagen/Audi Group vehicles is coated with a catalyst that helps reduce Ozone, The G611 sensor monitors this function and is part of the federal emissions control of these vehicles which allows the manufacture to receive EPA 'credits'. | ||
** This | ** This technology is called PremAir®, see the BASF web site for more information. | ||
** https://catalysts.basf.com/products-and-industries/mobile-emissions-catalysts/specialized-catalysts/premair | ** https://catalysts.basf.com/products-and-industries/mobile-emissions-catalysts/specialized-catalysts/premair | ||
Revision as of 15:45, 25 June 2018
U102F - Fan Identification Sensor: No Communications
Possible Causes
- Wiring, connections concerns or faulty G611-Radiator Identification Sensor
Possible Solutions
- Correct wiring, connection concerns or replace failed G611-Radiator Identification Sensor (w/radiator).
Special Notes
- Currently, the G611-Radiator Identification Sensor is not available separately, it comes with a new radiator when ordered from the vehicle's manufacture. The sensor will need to be attached to the radiator with AMV-195-KD1-01 adhesive, See Volkswagen Tech Tip 19-12-01 for more information.
- The cooling surface of the radiator on some Volkswagen/Audi Group vehicles is coated with a catalyst that helps reduce Ozone, The G611 sensor monitors this function and is part of the federal emissions control of these vehicles which allows the manufacture to receive EPA 'credits'.
- This technology is called PremAir®, see the BASF web site for more information.
- https://catalysts.basf.com/products-and-industries/mobile-emissions-catalysts/specialized-catalysts/premair
- Note: The fault code 'U1030-LIN bus inactive' may also be present,this should clear when the U102F fault has been corrected.