Difference between revisions of "C1292/021138"
From Ross-Tech Wiki
(Created page with "__FORCETOC__ == C1292/021138 - Clutch Actuator for All Wheel Drive: Missing Calibration / Basic Setting == == Possible Symptoms == * MIL (Malfunction Indicator Lamp) ON ==...") |
|||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| − | == C1292 | + | == C1292 - Clutch Actuator for All Wheel Drive == |
| + | === C1292 - Clutch Actuator for All Wheel Drive: Missing Calibration / Basic Setting === | ||
| − | == Possible Symptoms == | + | ==== Possible Symptoms ==== |
* MIL (Malfunction Indicator Lamp) ON | * MIL (Malfunction Indicator Lamp) ON | ||
| − | == Possible Causes == | + | ==== Possible Causes ==== |
* All Wheel Drive Control Module -J492- replaced | * All Wheel Drive Control Module -J492- replaced | ||
* Components associated with clutch actuator replaced | * Components associated with clutch actuator replaced | ||
* Basic Settings not performed after repairs | * Basic Settings not performed after repairs | ||
| − | == Possible Solutions == | + | ==== Possible Solutions ==== |
* Perform Basic Settings for the All Wheel Drive Control Module -J492- after clearing all other fault codes | * Perform Basic Settings for the All Wheel Drive Control Module -J492- after clearing all other fault codes | ||
| − | == Special Notes == | + | ==== Special Notes ==== |
* Use the following Basic Settings in vehicles with ASAM Dataset: EV_AWDCQUOD31 | * Use the following Basic Settings in vehicles with ASAM Dataset: EV_AWDCQUOD31 | ||
** IDE02906-ENG188617 – Resetting clutch data (Reset Kupplungsdaten) | ** IDE02906-ENG188617 – Resetting clutch data (Reset Kupplungsdaten) | ||
Latest revision as of 18:44, 18 September 2025
C1292 - Clutch Actuator for All Wheel Drive
C1292 - Clutch Actuator for All Wheel Drive: Missing Calibration / Basic Setting
Possible Symptoms
- MIL (Malfunction Indicator Lamp) ON
Possible Causes
- All Wheel Drive Control Module -J492- replaced
- Components associated with clutch actuator replaced
- Basic Settings not performed after repairs
Possible Solutions
- Perform Basic Settings for the All Wheel Drive Control Module -J492- after clearing all other fault codes
Special Notes
- Use the following Basic Settings in vehicles with ASAM Dataset: EV_AWDCQUOD31
- IDE02906-ENG188617 – Resetting clutch data (Reset Kupplungsdaten)
- IDE03198-ENG188614 – Static calibration (Erstkalibrierung)