VW Passat (3C) Tire Pressure Monitoring: Difference between revisions
Table Of Contents
- 1. Coding
- 2. Security Access
-
3.
Adaptation
- 3.1.3 Channel 002: Wheel Set
- 4. Special Notes
No edit summary |
|||
| Line 43: | Line 43: | ||
== Special Notes == | == Special Notes == | ||
* The following Tech Tip will help explain this TPMS system: [[VW TPMS Systems without Wheel Position Recognition]] | |||
The following Tech Tip will help explain this TPMS system: | * When Direct TPMS is fault-free but the TPMS light is still illuminated in the instrument cluster make sure the 03-ABS control module does NOT have Indirect TPMS enabled at the same time. Having two different types of TPMS enabled at the same time will result in conflicts. | ||
[[VW TPMS Systems without Wheel Position Recognition]] | |||
Latest revision as of 14:20, 12 November 2025
Coding
2004 - 2009 Model Years
- Rest of World (RoW):
- 0161211 = Factory
- 0161210 = Service (for manual input of specified pressure)
- North America (NAR):
- 0100101 = Factory
- 0100100 = Service (for manual input of specified pressure)
2010 and newer vehicles equipped with the (BCM) 09-Cent. Elect. module have a different coding chart. These models include the Jetta, Golf, Tiguan and Eos and use Long Coding. The [Long Coding Helper] will provide the needed coding information if the original coding cannot be retrieved.
Note: When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels afterward to their specified Values.
Security Access
- 01503 - General Adaptation "Enabling"
Adaptation
Channel 002: Wheel Set
Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1.
- Wheel set 2 would normally be winter or seasonal use wheels. Measuring Block 25 will show which "Reifen-Satz" is enabled.
Channel 005: Specified Tire Pressure at Full Load (Front Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 006: Specified Tire Pressure at Partial Load (Front Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 007: Specified Tire Pressure at Full Load (Rear Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 008: Specified Tire Pressure at Partial Load (Rear Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Special Notes
- The following Tech Tip will help explain this TPMS system: VW TPMS Systems without Wheel Position Recognition
- When Direct TPMS is fault-free but the TPMS light is still illuminated in the instrument cluster make sure the 03-ABS control module does NOT have Indirect TPMS enabled at the same time. Having two different types of TPMS enabled at the same time will result in conflicts.
No categories.