00810

From Ross-Tech Wiki

00810 - Sensor 1/2 for Brake Pressure

00810 - Sensor 1/2 for Brake Pressure: No or Incorrect Basic Setting / Adaptation

Possible Symptoms

  • Malfunction Indicator Light (MIL) active

Possible Causes

  • Sensor 1/2 for Brake Pressure Basic Setting lost/not performed

Possible Solutions

  • Perform Sensor 1/2 for Brake Pressure Basic Setting


00810 - Sensor 1/2 for Brake Pressure: Implausible Signal

Possible Symptoms

  • Malfunction Indicator Light (MIL) active

Possible Causes

  • Sensor 1/2 for Brake Pressure faulty

Possible Solutions

  • Check/Replace Sensor 1/2 for Brake Pressure

Special Notes

  • In cases where the Sensor for Brake Pressure is part of the Brake Hydraulics Unit, the complete Unit may need to be replaced.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=00810&oldid=4509"