00810
From Ross-Tech Wiki
Table Of Contents
-
1.
00810 - Sensor 1/2 for Brake Pressure
-
1.1.1
00810 - Sensor 1/2 for Brake Pressure: No or Incorrect Basic Setting / Adaptation
- 1.1.1.2 Possible Symptoms
- 1.1.2.2 Possible Causes
- 1.1.3.2 Possible Solutions
-
1.2.1
00810 - Sensor 1/2 for Brake Pressure: Implausible Signal
- 1.2.1.6 Possible Symptoms
- 1.2.2.6 Possible Causes
- 1.2.3.6 Possible Solutions
- 1.2.4.6 Special Notes
-
1.1.1
00810 - Sensor 1/2 for Brake Pressure: No or Incorrect Basic Setting / Adaptation
00810 - Sensor 1/2 for Brake Pressure
00810 - Sensor 1/2 for Brake Pressure: No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Sensor 1/2 for Brake Pressure Basic Setting lost/not performed
Possible Solutions
- Perform Sensor 1/2 for Brake Pressure Basic Setting
- See Vehicle specific Diagnostic Procedures for Details
00810 - Sensor 1/2 for Brake Pressure: Implausible Signal
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Sensor 1/2 for Brake Pressure faulty
Possible Solutions
- Check/Replace Sensor 1/2 for Brake Pressure
Special Notes
- In cases where the Sensor for Brake Pressure is part of the Brake Hydraulics Unit, the complete Unit may need to be replaced.