00933

From Ross-Tech Wiki

Jump to: navigation, search

Contents

00933 - Electric Window Motor; Passenger Side (V148)

00933 - Electric Window Motor; Passenger Side (V148): No or Incorrect Basic Setting / Adaptation

Possible Symptoms

  • Window Automatic Run not working
  • Pinch Protection limited

Possible Causes

  • Automatic Run & Pinch Protection not adapted
  • Incorrect Window Motor / Door control module installed

Possible Solutions

  • Adapt Automatic Run & Pinch Protection (see Special Notes)
  • Verify the correct Window Motor(s) / Door control module(s) are installed

Special Notes

  • Pinch Protection Adaptation
    • Make sure the window in question is completely closed.
    • Use the driver door window buttons to operate the window(s).
    • Roll down the window and keep holding the button down for 2 additional seconds after the window is already fully opened.
    • Roll up the window and keep holding the button up for 2 additional seconds after the window is already fully closed.
    • Now test the window automatic.



Unless otherwise noted, all content on this site is Copyright © 2000-2010 by Ross-Tech LLC. All rights reserved.
"VCDS" is a Registered Trademark of Ross-Tech, LLC.
Ross-Tech is not affiliated with the Volkswagen Group in any way.