01130

From Ross-Tech Wiki

Jump to: navigation, search

Contents

01130 - ABS Operation

01130 - ABS Operation: Implausible Signal

Possible Causes

  • Fuse(s) faulty
  • Modifications/Retrofits incompatible
  • Wiring from/to Brake Electronics Control Module (J104) faulty
    • Electrical Interference from External Sources
      • High Frequency Radiation (e.g. non-insulated Ignition Cable)
  • Brake Electronics Control Module (J104) faulty

Possible Solutions

  • Check Fuse(s)
  • Check Vehicle for Modifications/Retrofits
    • Temporarily remove Modifications/Retrofits (including Wiring)
  • Check Wiring from/to Brake Electronics Control Module (J104)
  • Check Brake Electronics Control Module (J104)

Special Notes

  • This Fault Code can only be cleared after performing a Test Drive above 20 km/h (13 mph).



Unless otherwise noted, all content on this site is Copyright © 2000-2010 by Ross-Tech LLC. All rights reserved.
"VCDS" is a Registered Trademark of Ross-Tech, LLC.
Ross-Tech is not affiliated with the Volkswagen Group in any way.